Exhaust Systems, Headers, Pipes and Hardware
Showing 181–192 of 211 resultsSorted by popularity
-
Exhaust System Kit
Borla Cat-Back Exhaust System Kit – 140545BC
- Borla BOR140545BC cat-back exhaust system kit
- Manufacturer fitment: 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500
- Also fits 2019 Silverado 1500 LD and 2019 GMC Sierra 1500 Limited
- Direct fit, per the manufacturer list
SKU: BOR140545BC -
-
-
Exhaust System Kit
Borla Cat-Back Exhaust – 140752BC
- Borla BOR140752BC 3-inch stainless cat-back exhaust with dual split rear exit
- Fits 2019–2026 Ram 1500 trucks in nine trims, including Big Horn, Laramie and Rebel
- Black chrome T-304 stainless tips, tip included
- Fits through factory bumper cut-outs; does not fit the Ram Classic
SKU: BOR140752BC -
-
-
Exhaust System Kit
Borla Cat-Back ATAK Exhaust System – 140616BC
- Borla BOR140616BC cat-back exhaust system with 2.75-inch tubing
- Fits 2015–2020 Ford F-150 King Ranch, Lariat, Platinum, Police Responder, SSV, XL and XLT trims
- T-304 stainless steel with dual split side exit and tip included
- Adapters 60556 or 60564 referenced for certain cab and bed setups
SKU: BOR140616BC -
-
-
Exhaust System Kit
Borla ATAK X-Pipe with Mid Pipes System – 60638
- Borla ATAK X-pipe with mid pipes, part number 60638, for listed 2017–2020 Ford F-150 trims
- Mid-section combines an X-pipe with ATAK mufflers
- Fits with either factory tailpipes or Borla tailpipes
- Built from T-304 stainless steel
SKU: BOR60638
Exhaust system types
The exhaust carries gases from the cylinder head to the tailpipe, and each segment is sold separately or as a kit. Knowing which segment you are replacing keeps the search short.
- Headers replace the restrictive factory manifold with individual tubes per cylinder.
- Cat-back systems replace everything from the catalytic converter rearward: pipe, muffler and tips.
- Axle-back systems replace only the muffler section and change sound the most for the least work.
- Mufflers, resonators and tips can be swapped individually to tune tone or appearance.
Material and construction
Aluminized steel is the economical choice and resists rust in dry climates. Stainless steel, often 304 grade, resists corrosion better and lasts longer where roads are salted. Mandrel-bent tubing keeps a consistent diameter through bends, which helps flow compared with crush-bent pipe. Check the material field on the product listing, as the sample listings do.
Sound and performance expectations
Exhaust upgrades change tone more reliably than power. Any gains are generally modest on an otherwise stock engine and are strongest when paired with other intake or tuning changes. Muffler design affects loudness and drone at highway speed, so read descriptions for the intended sound level. Single-side or dual-rear exits also change fit and appearance.
Emissions and legal points
Catalytic converters are emissions equipment. Federal rules prohibit removing or defeating them, and some states, including those that follow California standards, require specific approved parts or an executive order number. Noise limits also vary by state and city. Check the product details and your local regulations before choosing.
Installation notes
- Confirm engine, cab and bed configuration, wheelbase and model year, since routing differs.
- Replace gaskets, clamps and hangers when you replace pipe.
- Allow clearance from the fuel tank, brake lines and body panels, and let the system cool before handling.
- Penetrating oil on old fasteners saves time, and a professional exhaust shop can handle welding or cutting.
Use clamps only where intended and tighten to the instructions' specification. After installing, check for leaks at each joint with the engine running.
Pairing parts and avoiding mistakes
Pipe diameter should suit the engine's output. Too small a pipe restricts flow, while a much larger one can reduce exhaust velocity and low-end response. Most trucks work well with the diameter the manufacturer of a cat-back system specifies for that engine, so stick to vehicle-specific kits unless you are building a custom system.
- Hangers and isolators should keep the system a few inches from the frame and body. Rubber hangers that sag can let pipes rattle.
- Clamps come as band, U-bolt and V-band styles. Band clamps seal better on slip joints than U-bolt types, which can crush the pipe.
- Spacers and adapters help when joining pipes of different diameters or aligning flanges, but check that the gasket surface is flat.
- Oxygen sensors must be reinstalled in their original bungs, and wiring should be kept away from the hot pipe.
Inspect the system for cracks, loose hangers and blown gaskets once a year. A ticking noise on cold start often points to a leak at the manifold or a flange gasket.
Popular Exhaust Systems, Headers, Pipes and Hardware brands
- MagnaFlow Exhaust (62)
- Flowmaster Exhaust (44)
- Borla (43)
- Dynomax Exhaust (16)
- Go Rhino (9)
- Corsa Performance Exhaust (8)
- Hedman (7)
- MBRP (3)
- Banks Power (3)
- JBA Headers (3)
- Afe Power (3)
- Mr. Gasket Company (2)
Shop Exhaust Systems, Headers, Pipes and Hardware by type
- Exhaust System Kit (107)
- Muffler (29)
- Exhaust Tips (27)
- Catalytic Converters (8)
- Exhaust Clamps (4)
- Exhaust Spacers (3)
- Exhaust Hanger (3)
- Exhaust Header Gaskets (2)
- Exhaust Pipes (3)
- Exhaust Headers (3)
- Exhaust Header Bolt (2)
- Exhaust Header Installation Kit (2)
- Exhaust Pipe Extension (2)
- Exhaust Pipe Adapter (2)
- Exhaust Bracket (2)
- Exhaust Manifold Gasket (2)
- Exhaust Resonators (2)
- Exhaust Flange Gasket (1)
- Exhaust Cut-Out (1)
- Exhaust Pipe Connector (1)
- Exhaust Manifold Gasket Set (1)
- Exhaust Intermediate Pipes (1)
- Exhaust Header Reducer (1)
- Exhaust Tail Pipes (1)
Exhaust Systems, Headers, Pipes and Hardware FAQ
What is the difference between cat-back and axle-back?
A cat-back system replaces the pipes, muffler and tips behind the catalytic converter. An axle-back replaces only the section behind the rear axle, usually the muffler and tips. Cat-backs affect flow and sound more, while axle-backs are simpler.
Will a new exhaust add horsepower?
Some systems give small gains, especially on engines where the factory exhaust is restrictive, but results vary. Expect the tone to change more than the power. Dyno claims should be treated carefully unless they match your vehicle.
Is stainless steel exhaust worth it?
Stainless resists rust and corrosion better than aluminized steel, so it tends to last longer, especially in areas that salt roads. Aluminized steel works well in dry climates and often costs less.
Are aftermarket exhausts legal?
It depends. Mufflers and pipes may face noise limits, and catalytic converters must meet emissions rules, with stricter requirements in some states. Check state and local regulations and the manufacturer's compliance information before choosing.











