Select your vehicle

Borla Borla Pro XS Muffler – 400479

Borla

Shop Borla Muffler on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Borla Pro XS muffler, part number 400479
  • Baffled design in stainless steel
  • 2.25-inch inlet and 2.25-inch outlet, centered inlet and offset outlet
  • Universal Fit, with no vehicle named.

Description

Overview

The Borla Pro XS muffler, part number 400479, is a baffled stainless steel muffler with 2.25-inch inlet and outlet tubes. Its inlet is centered and its outlet is offset. Baffled mufflers use internal chambers to cut noise, and generally aim for a quieter tone than straight-through designs.

It is a universal fit with no specific vehicle attached, so the tube diameters and outlet position are what you match to your exhaust system.

Key features

  • Baffled muffler design
  • Stainless steel construction
  • Centered inlet with offset outlet
  • Equal 2.25-inch inlet and outlet tubes

Choosing a baffled muffler

Baffled mufflers route exhaust through internal chambers and perforated tubes, which reduce noise while keeping flow reasonable for everyday driving. The internal design makes a baffled muffler heavier and larger than a simple straight-through unit, so it needs solid hanger support. Look at how the muffler sits under the vehicle, since its body length affects clearance over axles and crossmembers.

An offset outlet is useful when the tailpipe has to run to one side, but it also shifts where the exhaust exits. Before welding, confirm the bend radius and heat shielding around the new position. Baffled mufflers are often replaced together with the tailpipe and hangers, because worn rubber hangers can let the muffler sag and crack the welds over time.

  • Check body clearance over axles and crossmembers
  • Replace worn hangers at the same time

Specifications

Brand Borla
Part number 400479 (BOR400479)
Material Stainless steel
Muffler type Baffled
Inlet location Centered
Outlet location Offset
Tube size (inlet/outlet) 2.25 in / 2.25 in
Fitment Universal Fit

Vehicle fitment

No vehicle is named for this muffler. It is marked Universal Fit, so compatibility depends on matching the 2.25-inch tubes and the offset outlet to your exhaust layout.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Dry-fit the muffler before final welding, since an offset outlet can change where the tailpipe exits the vehicle.

What’s included

Check whether mounting hardware and tailpipe sections are needed for your install before starting.

Not included: Source any pipe, hangers or clamps needed to connect the muffler before the install.

Questions & Answers

Does the Borla 400479 fit my vehicle?

The muffler is marked Universal Fit and names no vehicle, year or engine. Match the 2.25-inch tubes and the offset outlet to your exhaust layout before ordering.

Is the Borla 400479 baffled or straight-through?

It is a baffled muffler. Baffles are internal chambers that generally quiet the exhaust compared with a straight-through design, and the body is stainless steel.

Where is the outlet on part 400479?

The inlet is centered and the outlet is offset, with both tubes measuring 2.25 inches. Check the outlet position against your tailpipe routing before installing.

Can a baffled muffler be swapped for a straight-through one on the same system?

Yes, the swap is common, but the tone and volume will change. Confirm the inlet and outlet sizes match, check tailpipe routing, and keep exhaust backpressure in mind when choosing a different design.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Borla Muffler on Amazon