Exterior Parts & Car Care
Showing 2677–2688 of 3396 resultsSorted by popularity
-
Fender Flares
Bushwacker Flat Style TJ Wrangler Fender Flare Set (Paintable) – 10920-07
- Jeep Wrangler TJ flat style fender flare set, front and rear
- Provides 6 in. of tire coverage and added clearance
- Flexible matte black TPO that resists impact
- Includes a DOT side marker light and reflector
- Designed for larger tires and wheels
SKU: B/W10920-07 -
Roof Rack Mounts
Smittybilt Heavy Duty Rain Gutter Clamps for Defender Rack Roof Rack – HDS-4
- Smittybilt heavy duty rain gutter clamps for the Defender Rack, model HDS-4
- Includes 4 clamps and an upper extension bracket
- Bracket height 3 to 4.5 inches from the bottom of the clamp to the top of the extension bracket
- Built for vehicles with factory rain gutters
SKU: S/BHDS-4 -
Hood Scoops
Bushwacker Air Induction Scoop – 15002
- Bushwacker 15002 air induction scoop for the Jeep Wrangler cowl vent
- OE textured finish that matches factory trim
- Dura-Flex 2000 TPO material, which Bushwacker says will not rust like steel
- Confirm fit for your model year before ordering.
SKU: B/W15002 -
Wiper Blades and Refills
PIAA Super Silicone Wiper Blade 13 Inch (330mm) – 95033
- 13 inch (330mm) PIAA Super Silicone wiper blade, part number 95033
- Direct fit range 11-13 inches; suits most hook and pin style arms
- Silicone rubber edge for water beading and streak-free wiping
- No vehicle make, model or year is listed
SKU: PIA95033 -
Truck Bed Mat
BedRug Impact Mat – IMT09CCS
- BedRug Impact Mat IMT09CCS, a TPO composite truck bed mat with a padded underlayer
- Slip and skid resistant flat surface for trucks with an existing spray-in liner or no bed liner
- Hook and loop fasteners install it in minutes with no drilling, sanding or prepping
- Bleach, battery acid, oil and gas wash off the surface
- UPC 870558006010; no vehicle list is provided with this product
SKU: BEDIMT09CCS -
Truck Bed Mat
BedRug XLT Mat – XLTBMQ15SBS
- BedRug XLT Mat, part number XLTBMQ15SBS, a custom-formed truck bed mat
- For trucks with an existing spray-in liner or no bed liner; no model years listed
- 100% polypropylene top with a flat, slip and skid resistant surface
- 3/4-inch padded under layer; installs with hook and loop fasteners
- Integrated tailgate gap guard hinge; UPC 870558005846
SKU: BEDXLTBMQ15SBS -
Truck Bed Mat
BedRug XLT Mat – XLTBMQ17SBS
- BedRug XLT Mat XLTBMQ17SBS for trucks with a spray-in liner or no bed liner
- Polypropylene top with a 3/4 inch padded base for cushioning
- Integrated tailgate hinge covers the bed-to-tailgate gap
- Hook and loop install, no drilling or sanding
- Fit depends on your exact truck; confirm before ordering
SKU: BEDXLTBMQ17SBS -
Truck Bed Mat
BedRug XLT Mat – XLTBMC07CCS
- BedRug XLT Mat XLTBMC07CCS, custom fit truck bed mat with a 100% polypropylene top
- Integrated tailgate gap guard hinge joins the bed piece to the tailgate piece
- 3/4 inch padded under layer for cushioning and impact resistance
- Installs in minutes with hook and loop fasteners; no drilling or sanding
- Fit depends on your exact truck; confirm year, model and trim before ordering
SKU: BEDXLTBMC07CCS -
Roof Rack
Smittybilt SRC Roof Rack – 76715
- Smittybilt SRC roof rack, model 76715, in textured black powder coat
- Removable cross bars for soft top or hardtop removal
- Four-point mounting that attaches to front door mounts and the rear frame
- Holds up to 300 pounds of evenly distributed cargo
SKU: S/B76715 -
Fender Liner
Poison Spyder DeFender Inner Fenders (Aluminum) – 14-02-080
- Bare aluminum front and rear inner fender set
- CNC laser cut aluminum sheet, 3-piece bolt-together per fender
- Bolt-in DeFender installation for the Armor Package
- No accessory mounting holes or brackets provided
- Part number 14-02-080, UPC 614901724868
SKU: PSC14-02-080
How this category is organized
Exterior Parts & Car Care is a wide category, so the subcategories are the quickest way to find what you need. The listings include protection parts, body and trim pieces, cargo carriers and small repair items from many brands, including Smittybilt, Bushwacker, Omix-Ada, Crown Automotive, Rugged Ridge, Bestop and Poison Spyder Customs.
- **Protection.** Rock sliders, skid plates, body armor, tube fenders and roll bars guard the underside and body from trail damage.
- **Carry and storage.** Roof racks, tire carriers, fuel and water can mounts, tailgate storage and truck bed items.
- **Body and trim.** Grilles, hoods, hood vents, door handles, hinges, tailgate parts and fuel filler doors.
- **Weather and glass.** Soft tops, windshield channels, window visors, wiper blades and washer parts.
- **Truck bed.** Bed liners, mats, side rail protectors and tailgate caps.
- **Care and repair.** Seals, snap repair kits, replacement locks and finishing touches.
Choosing a part
- **Define the job.** Ask whether you need protection, appearance, repair or carrying capacity. A rock slider and a window visor serve very different purposes.
- **Material and finish.** Steel is strong and heavy and needs coating. Aluminum saves weight. Powder coat and paintable plastic have different upkeep. Bare steel needs paint before use.
- **Vehicle fit.** Most exterior parts are vehicle specific because body lines, mounting points and sensors differ by year and model. Confirm fitment for your exact year, make and model, and use the product's notes, such as 2- and 4-door or paintable finish.
- **Hardware and tools.** Some products need welding, drilling or reuse of factory hardware. Read the details in the listing.
Installation notes
Protective parts such as rock sliders, skid plates and roll bars attach to the frame or body structure, so use the specified hardware and torque to the manufacturer's values. Welded parts should be installed by someone who can weld properly. Roll bars and cages are safety equipment, and a professional install is wise.
Soft tops and trim parts often depend on temperature and careful alignment, so follow the instructions. Fender flares, visors and lighting can be regulated by state, so check local regulations. Always keep the weight of racks and carriers within the vehicle's rated limits and the rack maker's load rating.
When shopping a category this wide, make a short list of your goals and measure the spots where parts will go. Note the vehicle's body style, cab length, roof type and factory options. Photograph existing mounts, because aftermarket parts often reuse them or require removal of trim.
Parts commonly used together include rock sliders with skid plates, tire carriers with bumpers-bumpers-tire-carriers-winch-mounts-2, fender flares with tire and wheel upgrades, and roof racks with crossbars and mounts. Common mistakes are overloading racks, ignoring clearance with lift or tire changes, and skipping rust protection on bare steel and weld seams. Maintenance depends on the part. Wash and wax painted and polished surfaces, inspect welds and bolts after hard trail use, check seals for drying or cracking, and keep drain holes on bed parts and racks clear.
Popular Exterior Parts & Car Care brands
- Bushwacker (357)
- Smittybilt (334)
- Crown Automotive (257)
- Bestop (252)
- Rugged Ridge (223)
- Omix-Ada (222)
- Poison Spyder Customs (194)
- Auto Ventshade (111)
- Rampage (98)
- BedRug (76)
- Kentrol (75)
- Jeep (69)
Shop Exterior Parts & Car Care by type
- Fender Flares (527)
- Rock Sliders and Guards (176)
- Skid Plates (149)
- Roof Rack (122)
- Side Window Vent Visors (125)
- Tube Fenders (102)
- Windshield Wiper & Washer (78)
- Hood Latch Assembly (75)
- Tire Carriers (71)
- Fuel Filler Doors (70)
- Roof Rack Mounts (68)
- Truck Bed Mat (59)
- Fuel and Water Cans (53)
- Exterior Hinges (42)
- Roll Cages & Roll Bars (44)
- Grille Shells (43)
- Floor Pan (40)
- Replacement Grilles (35)
- Kleinn Train Horns (26)
- Wiper Blades and Refills (26)
- Hood Vent (31)
- Truck Bed Tailgate Extension (32)
- Truck Bed Liner (29)
- Truck Bed Organizer (29)
- Tailgate Covers and Storage (27)
- Exterior Door Handle (22)
- Windshield Bracket (21)
- Grille Emblems (24)
- Tailgate Locks (24)
- Windshield Channel (23)
Exterior Parts & Car Care FAQ
How do I find the right exterior part for my vehicle?
Start with the subcategory for the part type, then check the product's fitment notes for year, make, model and body style. Confirm fitment for your exact vehicle using the manufacturer's specifications.
Do rock sliders and skid plates need professional installation?
Bolt-on versions can be done with basic tools and a helper, while others require welding. Because they attach to structural parts, use the specified hardware and torque, and consider a professional if welding is needed.
What does paintable mean on fender flares or trim?
Paintable parts come with a matte or primed surface that accepts paint, so you can match the vehicle color. Preparation, such as cleaning and using an adhesion promoter, is needed for a good finish.
Are exterior accessories regulated?
Some are. Fender coverage, window visors, lighting and bumpers can be subject to state rules. Requirements vary, so check local regulations before modifying the vehicle.








