Overview
The BedRug XLT Mat, part number XLTBMQ15SBS, is a custom-formed truck bed mat for trucks with an existing spray-in liner or no bed liner. It lays inside the bed to give a flat, slip and skid resistant work surface. It is made to match the specific make and model of each truck, filling in ribs and contours for a smooth, void-free loading area.
The mat handles heavy loads from mulch to bleach. Its polypropylene top layer resists fading and UV exposure, and the foam underneath does not absorb water. Water runs off through the factory drain holes, and the mat dries in as little as 20 minutes.
Key features
- Flat, slip and skid resistant polypropylene top layer
- Integrated tailgate gap guard hinge that connects the bed piece to the tailgate piece
- 3/4-inch padded under layer for dent and impact resistance
- Cushioned surface that helps your knees while you work in the bed
- Hook and loop fasteners, with no sanding, prepping or drilled holes
- Fade and UV resistant top, and foam similar to life jacket foam that resists mold and mildew
- Bleach, battery acid, oil and gas wash right off the surface
Hauling with a formed mat
A formed mat takes on the shape of the bed, which makes it sit flatter than a loose cover. That fit helps keep loads stable when the truck moves, but it also means the mat is only as good as its match to the bed. Check the bed’s ribs and contours before buying, and make sure the mat sits tight at the front.
Long-term care is simple. Rinse the surface after muddy or chemical loads, and let it drain fully before stacking anything on it. Inspect the hook and loop fasteners and the tailgate hinge every few months, especially on rough roads, and replace worn parts before debris gathers under the mat.
- Rinse after muddy or chemical loads
- Let the mat drain before stacking gear
- Inspect fasteners and hinge every few months
Specifications
| Brand | BedRug |
|---|---|
| Part number | XLTBMQ15SBS |
| UPC | 870558005846 |
| Top layer material | 100% polypropylene (essentially plastic) |
| Under layer thickness | 3/4 inch padded foam |
| Surface | Flat, slip and skid resistant |
| Attachment | Hook and loop fasteners |
| Water absorption | None; water runs off |
| Fade and UV | Resistant |
Vehicle fitment
The mat is formed to match each truck bed’s make and model, so the bed shape of your own truck decides whether it matches.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mat attaches with hook and loop fasteners, so the bed needs no sanding, prepping or drilled holes. The integrated tailgate hinge piece sits over the gap between the bed and the tailgate, so set it there when you lay the mat down.
What’s included
The package is the mat with its hook and loop fastening only, and no other items are included.




