Automatic Transmissions covers the service and upgrade parts for the automatic gearbox rather than complete units: filters and gaskets from Crown Automotive and Omix-Ada for Jeep transmissions such as the 45RFE, B&M Holeshot torque converters and TranspakShift kits, BD Diesel valve bodies, billet flexplates and heavy duty transmission pans for Dodge and Ram diesels, Mag-Hytec pans, dipsticks and shift cable brackets.Identify your transmission model before comparing the products below.
Automatic Transmissions
Showing 1–12 of 26 resultsSorted by popularity
Shop Automatic Transmissions by type
-
Auto Trans Filter
Omix-ADA Automatic Transmission Filter and Gasket Kit – 19003.07
- Omix-Ada automatic transmission filter and gasket kit, part number OAI19003.07
- Fitment shown as Universal Fit; no Jeep year, model or transmission is named
- Direct OE replacement design with a limited five year warranty
SKU: OAI19003.07 -
-
Transmission Valve Body
Bd Diesel Transmission Valve Body – 1030423
- BD Diesel 1030423 exchange valve body for 2003–2007 Dodge Ram 2500 and 3500 trucks
- Revised valve design, new springs and larger oil ports
- Hand-lapped surfaces and new trim valves
- Second gear lock-up requires TowLoc or TorqLoc
SKU: BDD1030423 -
Torque Converter
Bd Diesel Performance Torque Converter – 1070217X
- Bd Diesel performance torque converter, part number BDD1070217X
- Billet aluminum stator for efficient torque multiplication
- Stamp-forged steel cover and furnace-brazed fins
- No vehicle fitment listed; confirm before ordering
SKU: BDD1070217X -
-
Transmission Pan
Bd Diesel Chrysler 68FRE Heavy Duty Transmission Pan (Painted) – 1061525
- BD Diesel 1061525 heavy duty transmission pan for the Chrysler 68FRE, painted
- Cast aluminum with heat-dissipating fins and a deeper pan for more fluid
- Magnetic drain plug and temperature sending unit port included
- Fitment list covers Dodge Dakota, Durango and Ram trucks, and Jeep Grand Cherokee (WJ)
SKU: BDD1061525 -
-
Auto Trans Detent Cable Bracket
B&M Automatic Transmission Shift Bracket/Lever Kit – 35498
- B&M 35498 automatic transmission shift bracket and lever kit
- For GM TH400, TH350, TH250, 200-4R, 700R4 and 4L60E transmissions
- Includes cable bracket, shift lever, spacers, swivel and cotter pin
- Fitment list covers 1999–2013 Chevrolet, GMC, Buick, Cadillac and Oldsmobile models
SKU: B/M35498 -
Know your transmission first
Nothing in this category is chosen by vehicle alone. The same Jeep or Ram could have left the factory with two or three different automatics, and a filter for a 45RFE will not fit a 42RE in the same year of Grand Cherokee. Find the transmission code on the pan shape, the case casting, the build tag or the glovebox code sheet, and work from it. Common names here are the Chrysler 45RFE and 68RFE, the Dodge 47RE and 48RE behind diesels, and the GM 4L60E, 700R4, TH350 and TH400 families.
Service parts: filters, pans and dipsticks
A filter and gasket kit is the heart of a fluid service, and it should be done at the interval in the owner's manual, sooner for towing and off-road use where the fluid runs hot. Deep transmission pans, such as the BD Diesel cast aluminum pan for the 68RFE with cooling fins, a magnetic drain plug and a temperature sender port, add fluid capacity and shed heat, which is the single best thing you can do for an automatic that tows. Note that a deeper pan may need a longer filter or filter extension and hangs lower under the truck. Factory style dipsticks replace broken or missing tubes; make sure the tube length and mount match your bellhousing.
Torque converters
A torque converter's stall speed is the engine rpm at which it stops slipping and starts transferring full torque. Higher stall, like the B&M Holeshot units at 2,900 to 3,500 rpm, lets a modified gas engine launch harder and suits a light vehicle with a camshaft that makes power higher up. For a diesel truck that tows, the opposite is wanted: a converter with a tighter stall, a billet stator and more lock-up clutch material, like the BD Diesel performance converter, so heat stays down and lock-up holds under boost. A converter also has to match the crank pilot diameter and the flexplate bolt pattern; the 1.71 inch crank pilot listed on the B&M units is one of those details.
Shift kits and valve bodies
- A shift kit, such as the B&M TranspakShift for the 1993 to 2001 4L60E, recalibrates the valve body for firmer, quicker shifts and less clutch slip, often with a choice of programs from mild to firm. It installs with the pan off and the transmission in the truck.
- A performance valve body, like the BD Diesel exchange unit for 2003 to 2007 Ram 2500 and 3500, replaces the whole valve body with revised passages, new springs and larger ports for a diesel that tows or has more power. Some functions, such as second gear lock-up, require the maker's controller.
- Shift bracket and lever kits adapt a cable shifter to GM transmissions when swapping a transmission or converting to an aftermarket shifter.
Flexplates
The flexplate bolts the converter to the crankshaft. On high output diesels the stock stamped plate can crack or shear its bolts, which is why BD Diesel sells a forged billet plate. Match the tooth count for the starter, the bolt pattern and the converter pad spacing, and use new bolts with thread locker at the factory torque.
Installation and fluid
Use the exact fluid specified for the transmission; many modern units are damaged by the wrong type, and ATF+4, Dexron VI and the various Mercon fluids are not interchangeable. Fill through the dipstick or the fill plug per the procedure, which on some units requires checking at a set temperature with the engine running. Torque pan bolts in a pattern and do not over-tighten, which distorts the rail and leaks. Converter and valve body work is for an experienced installer; a converter must be seated fully on the pump before the transmission is bolted up or the pump is destroyed on the first start.
Popular Automatic Transmissions brands
- Bd Diesel (7)
- Crown Automotive (7)
- B&M (4)
- Omix-Ada (3)
- Mag-Hytec (2)
- Banks Power (2)
- Mr. Gasket Company (1)
Automatic Transmissions FAQ
How do I identify my automatic transmission model?
Check the pan shape against a chart, the casting numbers on the case, the build tag on the side of the transmission or the vehicle's code sheet in the glovebox or on the door jamb. Filters, converters and shift kits are all matched to the transmission model, not the vehicle.
What stall speed torque converter should I choose?
A higher stall, around 2,900 to 3,500 rpm, suits a modified gas engine that makes power higher up and wants a hard launch. A diesel that tows wants a tighter converter with a strong lock-up clutch to keep heat down. Match the crank pilot and bolt pattern too.
Is a deep transmission pan worth it?
For towing and off-road use, yes. Extra fluid and cooling fins lower operating temperature, which is what wears out an automatic. Check whether a longer filter is needed, watch the reduced ground clearance, and use the pan's magnetic drain plug at every service.
Can I install a shift kit without removing the transmission?
Most shift kits, including the B&M TranspakShift for the 4L60E, install with the pan and filter off while the transmission stays in the truck. A full valve body swap is also done in place. Follow the instructions for the program you want and refill with the correct fluid.

















