Overview
The Banks Power Billet Torque Converter, part number 72515, is a torque converter for automatic transmissions in trucks built for more performance. Banks says its three-friction-element clutch system and billet steel cover hold solid contact without flexing, which lets the converter carry up to 1800 lb-ft of torque, three times the 600 lb-ft of the stock unit.
The lockup clutch resists slip, which helps keep transmission fluid cooler and supports transmission life. The assembly is balanced and blueprinted, and the torque band is matched so power reaches the wheels. The converter is designed for racing use and delivers nearly one second off the 0-60 mph acceleration time.
Key features
- Three-friction-element clutch system for solid lockup
- Billet steel cover designed to hold contact without flexing
- Slip-resistant lockup clutch that Banks says keeps fluid cooler
- Balanced and blueprinted assembly
- Torque band matched to deliver power to the wheels
Matching the converter to the transmission
A torque converter links the engine to the automatic transmission through fluid, multiplying torque when the vehicle pulls away and locking up at cruising speed to reduce slip. Because the converter sits between the engine and the gearbox, its bolt pattern, hub and input shaft must match the transmission exactly. Check the converter’s fit against the transmission before assembly, since a mismatch can cause leaks, vibration or damage.
A stronger converter puts more load through the transmission, so inspect the cooler, lines and fluid before installation. Old fluid carrying fine metal or a burnt smell suggests internal wear that should be found before a new converter goes in. Replace the filter and fluid when the converter is changed, and inspect the flex plate or drive plate for cracks while the transmission is out.
Specifications
| Brand | Banks Power |
|---|---|
| Part number | 72515 |
| UPC | 801279725157 |
| Torque capacity | 1800 lb-ft (stock 600 lb-ft) |
| Cover material | Billet steel |
| Clutch system | Three-friction-element |
| Fitment tag | Universal Fit |
Vehicle fitment
Banks tags this converter as Universal Fit, so it is not built around a single vehicle. No year, make, model or trim is listed. A torque converter has to match the transmission and engine, so check with Banks before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a torque converter is transmission-level work, so plan for the transmission to be opened or removed. Check the converter’s fit against the transmission before assembly. Disconnect the battery before working near the drivetrain.
What’s included
The torque converter is the item offered; no additional hardware is specified.









