Jeep Wrangler (YJ) Bumpers and Grille Guards
38 bumpers and grille guards listed for the 1987–1995 Jeep Wrangler (YJ)
Every part on this page is listed by its maker for this model; the most represented brands are Rugged Ridge, Poison Spyder Customs and Rampage. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 38 resultsSorted by popularity
-
-
Front Bumpers
Trail Gear Rock Defense Jeep Front Bumper (Bare) – 303141-2-KIT
- Fits 1987-2006 Jeep Wrangler YJ and TJ (listed years)
- 1/4 inch bare steel, brake-formed, stubby width
- Winch plate pre-drilled for most 5000-10000 model winches
- Bolt-on; includes fairlead mount hardware and D-ring recovery points
SKU: TGI303141-2-KIT -
Rear Bumpers
Smittybilt Tubular Rear Bumper without Hitch in Stainless Steel (Stainless Steel) – RB01-S
Rear BumpersSmittybilt Tubular Rear Bumper without Hitch in Stainless Steel (Stainless Steel) – RB01-S
- Stainless steel tubular rear bumper for the 1997–2006 Wrangler TJ and 1987–1995 Wrangler YJ
- 1-piece, robotically welded design with pre-cut vertical uprights
- No receiver hitch; D-ring mounts not included
- Lifetime warranty on polished stainless
SKU: S/BRB01-S -
-
Rear Bumpers
Smittybilt XRC Rear Tire Carrier Bumper (Black) – 76653
- Fits 2004–2006 Wrangler (LJ) Unlimited, 1997–2006 Wrangler (TJ) and 1987–1995 Wrangler (YJ)
- Black powder coat rear tire carrier bumper
- Built-in Class III receiver hitch and two D-ring mounts
- 3/16-inch cold rolled steel construction
- Bumper only; tire carrier sold separately as part 76654
SKU: S/B76653 -
Rear Bumpers
Rugged Ridge 3 Inch Rear Tube Bumper without Hitch (Black) – 11571.03
- Fits 2004–2006 Wrangler (LJ) Unlimited, 1997–2006 Wrangler (TJ) and 1987–1995 Wrangler (YJ)
- 3-inch rear tube bumper with welded end caps
- Room for tires up to 31 inches
- Dual-stage E-coat and powder coat, textured black
- Smooth ground welds; five-year paint warranty
SKU: RUG11571.03 -
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
Front BumpersRugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
- Stainless steel dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Welded end caps, limited lifetime warranty
SKU: RUG11563.03 -
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Black) – 11561.03
- Textured black dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ models
- Welded end caps, limited lifetime warranty
SKU: RUG11561.03 -
Front Bumpers
Rugged Ridge 3 Inch Dual Tube Front Bumper with Center Hoop (Black) – 11560.01
- 3 inch dual tube front bumper with center hoop in high gloss black, non-winch style
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Smooth ground welds and welded end caps
- Limited lifetime warranty
SKU: RUG11560.01 -
Front Bumpers
Rugged Ridge Double X Striker for Front Modular Bumper (Black) – 11540.25
- Double X Striker for the XHD front modular bumper in textured black
- Made from .120 wall tubing, bumper not included
- Made for CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK
- Mounting tabs accept 3/4 inch D-ring shackles
SKU: RUG11540.25 -
Grille Guards
Rugged Ridge Hoop Over-rider for Modular Front Bumper (Black) – 11540.14
- Fits Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK per the manufacturer list
- Textured black powder-coated steel hoop over-rider
- Bolts directly onto XHD front bumpers
- For 2 and 4-door models
SKU: RUG11540.14 -
Front Bumpers
Rugged Ridge Stinger Over-rider for Modular Front Bumper (Black) – 11540.13
- Textured black stinger over-rider for the XHD modular front bumper, 2 inch tubing
- Fits XHD front bumpers 11540.10 and 11540.11
- Made for Jeep Wrangler YJ, TJ, LJ and JK
- Provides grille protection, bolt-on modular design
SKU: RUG11540.13 -
Rear Bumpers
Rugged Ridge 3 Inch Stainless Steel Tube Rear Bumper (Stainless Steel) – 11522.01
- Fits Jeep CJ3, CJ5, CJ6 and CJ7, Scrambler, Willys CJ and Wrangler YJ and TJ
- 3-inch stainless steel tube rear bumper
- Welded end caps and mounting hardware included
- Bolt-on installation with no drilling
- Room for an oversized tire
SKU: RUG11522.01 -
Front Bumpers
Rugged Ridge Front Stainless Steel Tube Bumper with Hoop (Stainless Steel) – 11520.01
- 3 inch double tube front bumper with over-rider hoop in polished 304 stainless steel
- Fits Jeep CJ, Scrambler and 1987–2006 Wrangler models
- Welded end caps, bolt-on installation with no drilling
- No winch, light or D-ring mounts
SKU: RUG11520.01 -
-
Rear Bumpers
Rampage Double Tube Rear Bumper with Receiver Hitch (Stainless Steel) – 8448
- Stainless steel double tube rear bumper with 2-inch receiver
- 304 stainless steel polished to a mirror finish
- Robotically welded, one-piece design
- 2-inch receiver hitch, not tow rated
- Fits Jeep CJ5, CJ7, Wrangler YJ, TJ and LJ models
SKU: RPP8448 -
Rear Bumpers
Rampage Recovery Rear Bumper with Tire Carrier (Black) – 78615
- Rear bumper with tire carrier for the 1997-2006 Jeep Wrangler TJ and 1987-1995 Wrangler YJ
- 3/16 inch steel plate with textured black powder coat
- Includes 3/4 inch clevis D-rings and a receiver hitch
- Lights are not included
SKU: RPP78615 -
-
Rear Bumpers
Rampage Double Tube Rear Bumper with Receiver Hitch (Black) – 7648
- Fits 1976–1983 and 1976–1986 Jeep CJ5 and CJ7, and Wrangler YJ, TJ and LJ models
- Black double tube rear bumper, robotically welded
- 2-inch receiver for accessory racks only, not rated for towing
- Zinc undercoat with dual powder coat finish
- One-piece welded design
SKU: RPP7648 -
Front Bumpers
Rock Hard 4×4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
Front BumpersRock Hard 4×4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
- Extreme Duty full-width winch bumper with grille guard for classic Jeeps
- 1/4 inch CNC laser cut and bent steel, black powder coat
- Winch mounted low in the bumper without affecting airflow
- Light tabs and D-ring mount included; must reuse factory hardware
SKU: RFPRH-4010 -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 13-16-020-DS
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 13-16-020-DS
- Trail Stinger BFH bumper for the 1987–1995 Wrangler YJ
- Stinger reaches 13.4″ forward and 17″ high
- 3/16″ plate steel with integrated winch mount
- Bare steel, shackle tabs of 1″ plate
SKU: PSC13-16-020-DS -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 13-16-020-DC
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 13-16-020-DC
- BFH bumper with Comp Stinger for the 1987–1995 Wrangler YJ
- 3/16″ plate steel with integrated winch mount
- Shackle tabs of 1″ plate for 3/4″ shackles
- Bare steel; no wider than the frame rails
SKU: PSC13-16-020-DC -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Brawler Bar (Bare)- 13-16-020-DB
- Fits 1987–1995 Jeep Wrangler (YJ) per the manufacturer fitment list
- Poison Spyder BFH front bumper in bare steel with shackle tabs and Brawler Bar, part 13-16-020-DB
- 3/16″ plate steel; integrated winch mount; no wider than the frame rails
- Brawler Bar extends 7.4 inch forward and 9.8 inch high; shackle tabs from 1″ plate steel
SKU: PSC13-16-020-DB
