Overview
The Rugged Ridge 11571.03 is a 3-inch textured black rear tube bumper for 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon models, 1997–2006 Wrangler (TJ) models and 1987–1995 Wrangler (YJ) models.
Rugged Ridge grinds its welds smooth to limit weak spots that tend to rust, and it uses welded end caps instead of plastic ones. The rear opening is 17 inches, which Rugged Ridge says allows tires up to 31 inches on the factory spare mount. The bumper is dual-stage E-coated and powder coated, and Rugged Ridge gives the paint a five-year warranty.
Smooth ground welds remove small weld pockets that can hold rust. Welded end caps replace plastic caps, which tend to be lost on the trail. The optional frame-mounted hitch is rated for lightweight towing, and many rear tube bumpers with integrated hitch boxes are not rated for towing at all.
Key features
- Smooth ground welds
- Welded end caps
- 17-inch rear opening for tires up to 31 inches
- Dual-stage E-coat and powder coat finish
- Textured black finish
- Five-year warranty on the paint
- Optional frame-mounted hitch available from Rugged Ridge
Towing and tire clearance
Tire clearance on a rear tube bumper depends on the spare mount, the opening and the tire’s overall diameter. Measure the tire you plan to carry, then check that it clears the bumper’s edges and the mount’s hardware. A larger tire also changes the load on the spare mount, so the mount deserves a look before the first trip with it.
A frame-mounted hitch is a separate purchase from the bumper. Towing weight and tongue weight ratings depend on the hitch itself, and the bumper does not add to them. Keep loads within the hitch rating, and check the hitch bolts and frame attachment after the first tow.
Rear tube bumpers take a lot of trail contact, so inspect the welds and end caps after hard use. Keep the spare mount’s bolts snug, look for cracked welds and bent tabs, and clean out any mud that packs around the mount or the hitch area to prevent corrosion.
- Measure tire diameter before fitting
- Check hitch bolts after the first tow
- Keep towing loads within the hitch rating
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11571.03 |
| UPC | 80431411695 |
| Product line | 3 Inch Rear Tube Bumper |
| Position | Rear |
| Fitment type | Direct fit |
| Finish | Textured black, dual-stage E-coat and powder coat |
| Rear opening | 17 inches |
| Tire size | Up to 31 inches |
| Receiver hitch | Not included |
| Optional hitch rating | 2,000lb towing weight, 200lb tongue weight capacity |
| Paint warranty | Five years |
| D-ring mount | Not included |
| Tire carrier | Not included |
Vehicle fitment
It fits 2004–2006 Wrangler (LJ) Unlimited and Unlimited Rubicon models, 1997–2006 Wrangler (TJ) models and 1987–1995 Wrangler (YJ) models. The fit covers the Unlimited and Unlimited Rubicon on the LJ, the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X on the TJ, and Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport on the YJ.
It fits the Wrangler (LJ), (TJ) and (YJ) years shown above. For the Wrangler (JK) from 2007 on or Jeep CJ models, verify your vehicle’s year, model and trim against that range before ordering.
What’s included
The bumper, without a receiver hitch.
Not included: The optional frame-mounted hitch is rated for lightweight towing at 2,000lb towing weight and 200lb tongue weight capacity. It is sold separately from the bumper.












