Overview
The Rugged Ridge 11560.01 is a 3 inch dual tube front bumper with a center hoop, in high gloss black, in the non-winch style. It fits the Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ.
The bumper has an enlarged opening for greater air flow and a clean off-road look, two welded light tabs for mounting off-road lighting, smooth ground welds and welded end caps. Rugged Ridge backs it with a limited lifetime warranty.
Key features
- 3 inch dual tube design with center hoop
- High gloss black powder coat
- Non-winch style
- Enlarged opening for greater air flow
- Two welded light tabs
- Smooth ground welds
- Welded end caps
- Limited lifetime warranty
Choosing a bumper for older Jeeps
Older Jeeps such as the CJ and early Wrangler generations often carry bumpers that are the first thing to protect the body on rough trails. A dual tube design spreads impact across two tubes and a center hoop, which helps keep the front of the Jeep square after contact. Think about the approach angle you need, because a bumper with a center hoop sits at a different height than a plain tube bumper.
Light mounting needs planning. The two welded tabs give a point to mount off-road lighting, but the lights and their wiring are sold separately. Choose lights sized for the tabs, route the harness so it clears the hoop and any winch area, and leave room for the grille and hood to open.
Look after the finish and welds. High gloss black is easy to clean, but chips should be touched up so rust does not start under the coating. Inspect the welded end caps and tube joints after hard trail use, especially where the tubes meet the frame mounts, and retighten the mounting hardware.
- Confirm light mount spacing before buying lights
- Touch up chips in the gloss black coating
- Inspect tube joints after rough trail use
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11560.01 |
| UPC | 804314116712 |
| Product type | Dual tube front bumper with center hoop |
| Position | Front |
| Tube size | 3 inch |
| Finish | High gloss black powder coat |
| Material | Steel |
| Width | Full |
| Light mounts | Included, two welded tabs |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1976-1983 CJ5, the 1976-1986 CJ7, the 1981-1985 Scrambler, the 1987-1995 Wrangler YJ, the 1997-2006 Wrangler TJ and the 2004-2006 Wrangler Unlimited LJ.
The 2007-2018 Wrangler JK and the earliest CJ years are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front tube bumper with center hoop and welded light tabs.
Not included: Lights and a winch mounting plate.














