Overview
The Rugged Ridge XHD Stinger Guard 11540.29 is a stamped steel radiator and grille guard for Jeep Wrangler YJ, TJ, LJ and JK models, made to complement the XHD Stinger 11540.13. It is contoured to match the dimensions of the Stinger and adds a muscular, off-road accent to the XHD bumper.
The guard is finished in a durable textured black powder coat. When properly installed it allows full use of the winch retaining hook, and its primary panel has eight elongated relief cuts that increase cooling airflow while still protecting the radiator and grille from off-road hazards.
Key features
- High-strength stamped steel construction
- Contoured to match the XHD Stinger
- Durable textured black powder coat
- Eight elongated relief cuts for cooling airflow
- Protects the radiator and grille
- Allows full use of the winch retaining hook when properly installed
- For 2 and 4-door models
Radiator guard and airflow
A radiator and grille guard sits in front of the cooling core, where it catches rocks, brush and gravel. Solid guards can restrict airflow at low speeds, which is why relief cuts matter on a trail vehicle. Eight elongated cuts in the primary panel let air pass through while keeping debris away from the radiator. Off-road, the cooling system gets hard use, so airflow is worth checking after long climbs.
Guard fit affects other parts too. Check that the guard does not touch the radiator, fan shroud or hood latch when the hood closes, and recheck the clearance after any bumper change. Winch hooks and fairleads need room to move, so keep the hook stored in its holder while driving and inspect the guard for dents after impacts. Paint chips in the textured powder coat should be touched up to slow corrosion.
- Look for coolant leaks after hard impacts
- Keep the winch hook stowed while driving
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11540.29 |
| UPC | 804314289577 |
| Product | XHD Stinger Guard |
| Finish | Textured black powder coat |
| Material | High-strength stamped steel |
| Fitment type | Direct fit, not weld-on |
| Works with | XHD Stinger 11540.13 |
| Relief cuts | Eight elongated cuts on the primary panel |
| Body styles | 2 and 4-door models |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK, the 2004–2006 Wrangler LJ, the 1997–2006 Wrangler TJ and the 1987–1995 Wrangler YJ. It is made to work with the XHD Stinger 11540.13.
The Wrangler JL, CJ models and Scrambler are not covered by this part. Double-check your year and trim before buying.
Installation notes
The guard works with the XHD Stinger 11540.13 and needs to be installed properly to keep the winch retaining hook fully usable.
What’s included
One XHD Stinger Guard.
Not included: The XHD Stinger 11540.13 and the bumper.






















