Overview
The 11540.25 is a Double X Striker for XHD front modular bumpers, made from .120 wall tubing in textured black. It is made for the Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK, and the XHD bumper is sold separately.
The design has a smaller profile than a stinger while still giving sturdy front bumper protection. The mounting tabs accept 3/4 inch D-ring shackles rated at 6.5 ton WLL, and the shackles are sold separately.
Key features
- Double X Striker design
- Textured black powder coat
- Made from .120 wall tubing
- Fits XHD steel front bumpers
- Smaller profile than a stinger
- Mounting tabs for 3/4 inch D-ring shackles
Choosing a D-ring setup
A striker gives the front of the Jeep a mounting point for recovery gear, so the shackles and strap rating matter as much as the bumper. Match the shackle size to the mounting tabs, and make sure the bow and pin fit the tab opening without binding.
Recovery loads should be pulled straight through the tab where possible, since angled pulls put side stress on the tubing and pin. Before a trip, check the shackle pin for wear and confirm it locks fully. Keep the winch line or strap rated for the load you expect, and inspect the striker welds and coating after any hard pull.
- Use shackles that match the tab size
- Pull straight through the tab when possible
- Inspect the pin and coating after each recovery
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11540.25 |
| UPC | 804314253882 |
| Product type | Double X Striker for XHD front modular bumper |
| Finish | Powder coat, black textured |
| Material | Steel, .120 wall tubing |
| Shackle size | 3/4 inch D-ring, 6.5 ton WLL (not included) |
| Light mounts | Not included |
| Winch mount | Not included |
| D-ring mount | Not included |
| Fit type | Direct fit |
Vehicle fitment
The 11540.25 fits the 1976-1983 CJ5, the 1976-1986 CJ7, the 1981-1985 Scrambler, the 1987-1995 Wrangler YJ, the 1997-2006 Wrangler TJ, the 2004-2006 Wrangler Unlimited LJ and the 2007-2018 Wrangler JK.
It fits the XHD steel front bumper and does not work as a stand-alone bumper. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Double X Striker.
Not included: The XHD front bumper and the 3/4 inch D-ring shackles are not included.












