Overview
The Rugged Ridge 11563.03 is a stainless steel dual tube front winch bumper with a center hoop. It fits the Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ. It is the stainless version of the 11561.03.
The bumper has a special cut-out for winch mounting, and the winch mounting plate is not included. Rugged Ridge points to part number 11238.12 for the plate. It also has an enlarged opening for greater air flow, smooth ground welds, welded end caps and a limited lifetime warranty.
Key features
- Stainless steel finish
- Dual tube design with center hoop
- Winch-style cut-out
- Enlarged opening for air flow
- Smooth ground welds
- Welded end caps
- Limited lifetime warranty
Winch setup and plate choice
A winch bumper with a cut-out relies on a separate mounting plate, so the plate and winch should be chosen together. Match the winch’s rated pull and mounting pattern to the plate, and confirm the plate bolts to the bumper without interfering with the hoop. Taking time at this step prevents fit problems when the winch is installed.
Stainless steel resists surface rust well, but the welds and any bare edges still need attention. Inspect the cut-out edges, the hoop joints and the end caps after rough trail use, and look for cracks or loose hardware. Wash off mud and road salt so grit does not build up in the welds.
Winching loads should be shared by the plate, the bumper and the frame mounts, so check each of them after heavy pulls. Keep the cable and hook away from the edges of the cut-out, and use a fairlead or roller where the line bends. Replace a frayed cable before it can damage the plate or bumper.
- Choose a winch that matches the plate
- Wash mud and salt off welds regularly
- Inspect the cut-out edges after each pull
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11563.03 |
| UPC | 804314116859 |
| Product type | Dual tube front winch bumper with center hoop |
| Position | Front |
| Finish | Stainless steel |
| Material | Steel |
| Width | Full |
| Winch mount | Cut-out for winch mounting; plate not included |
| Light mounts | Not included |
| D-ring mount | Not included |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1976-1983 CJ5, the 1976-1986 CJ7, the 1981-1985 Scrambler, the 1987-1995 Wrangler YJ, the 1997-2006 Wrangler TJ and the 2004-2006 Wrangler Unlimited LJ.
The 2007-2018 Wrangler JK is not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A winch needs mounting plate 11238.12, which is a separate part.
What’s included
One stainless steel front tube bumper with center hoop.
Not included: Winch mounting plate 11238.12, the winch and lights.












