Select your vehicle

Hyline Offroad Standard Front Bumper (Black) – 250.100.110

Hyline Offroad

Shop Jeep Wrangler TJ Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 60-inch full-width steel front bumper for Jeep Wrangler YJ, TJ and LJ
  • Winch mount compatible, with D-ring mounts welded front and back
  • Bolt-on installation with no drilling required
  • Part number HYL250.100.110, powder coated black

Description

Overview

The Hyline Offroad Standard Front Bumper, part number HYL250.100.110, is a 60-inch full-width front bumper in powder coated black steel for the 1987–1995 Jeep Wrangler (YJ), 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ). Hyline designed it so the winch can be installed after the bumper is mounted to the vehicle, and the bumper is a bolt-on part that needs no drilling.

Hyline fabricates the bumper from USA Grade 3/16-inch steel plate. The plate is laser cut, CNC formed, robotically welded and hand finished. Before coating, each bumper receives a zinc phosphate rinse and cleaning, followed by an E-coat and a smooth black powder coat.

Check the bumper’s weight and your winch and recovery setup against your vehicle’s towing limits before use.

Key features

  • Winch mount compatible, with the winch installed after the bumper is mounted
  • D-ring mounts of 5/8-inch thick plate, welded solid front and back for use as recovery points
  • 1/4″-20 threaded inserts for mounting a license plate
  • Bolt-on design with no drilling required
  • Zinc phosphate rinse, E-coat and smooth black powder coat

Winch and recovery setup

A front bumper is often the first point of contact in a recovery, so the winch and its mounting area take real load. When planning a pull, use the welded D-ring mounts rather than the bumper body, and pull straight on or as close to straight as the attachment allows. Side pulls put stress on the bumper corners and the frame behind them.

Pick a winch whose rated line pull matches your vehicle and typical loads, and remember the winch adds weight at the front end. Recovery straps, shackles and snatch blocks are usually replaced after heavy use, so inspect them each time. Check the bumper bolts after the first few trail runs, since vibration can loosen hardware on any bolt-on steel bumper.

  • Use rated shackles at the D-ring mounts
  • Inspect recovery straps for cuts after each use
  • Re-torque bumper bolts after the first trail runs

Specifications

Brand Hyline Offroad
Part number HYL250.100.110
Position Front
Width Full, 60 inches
Material Steel, 3/16-inch plate
Finish Powder coat, smooth black
Winch mount compatible Yes
D-ring mounts Included, 5/8-inch plate
License plate mounting 1/4″-20 threaded inserts
Light mounts included No

Vehicle fitment

It fits the 1987–1995 Jeep Wrangler (YJ), 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ) as a direct fit.

The list does not include the Wrangler JK (2007–2018) or the Wrangler JL (2018–2022). Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The bumper bolts on without drilling. Hyline’s photos show a winch guard, but the guard is not included and is available separately as part number HYL250.100.120. The pictures are for illustration only, and the bumper looks the same without the guard or hoop.

What’s included

The bumper includes the 1/4″-20 threaded inserts for a license plate and the welded D-ring mounts.

Not included: the winch guard or hoop (available separately as part number HYL250.100.120) and light mounts.

SKU: HYL250.100.110 Categories: , ,

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X
Jeep Wrangler (YJ)1987–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Hyline Offroad front bumper fit a Jeep Wrangler TJ?

Yes. Hyline lists part number HYL250.100.110 for the 1997 through 2006 Jeep Wrangler (TJ) with direct fit. The list also covers the YJ from 1987 through 1995 and the LJ from 2004 through 2006.

Do I need to drill holes to install this bumper?

No. The bumper is a bolt-on part that needs no drilling. The winch can be installed after the bumper is mounted to the vehicle.

Is a winch guard included with the bumper?

No. Hyline's photos show a winch guard for illustration, but the guard is not included. It is available separately under part number HYL250.100.120, and the bumper is the same with or without it.

Can I mount a winch to this front bumper?

Yes. The listed winch mount compatibility is Yes, and the bumper is designed so the winch goes on after the bumper is mounted to the vehicle. The winch itself is a separate part.

Do I need a winch guard?

Not for the bumper to function, since it works the same with or without one. A winch guard or hoop adds protection for the winch and its line when a winch is mounted, and it is sold as a separate part for this bumper.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Bumpers on Amazon