Overview
The Rock Hard 4×4 Parts RH-4010 is an Extreme Duty full-width front bumper with a built-in winch mount and grille guard, for Jeep CJ5, CJ7, Scrambler, Wrangler YJ, Wrangler TJ and Wrangler LJ models. It is made from 1/4 inch CNC laser cut and bent steel with a black powder coat finish.
The winch mounts low in the bumper and does not block airflow. The design accommodates large winches, including the Warn Power Plant. It provides full-width protection without cutting the factory frame. Light tabs are included for accessory lights, and the factory hardware is reused for installation.
Key features
- 1/4 inch CNC laser cut and bent steel
- Winch mount included, set low in the bumper
- Full-width protection with grille guard
- Approach angle achieved without cutting the factory frame
- Designed for large winches, including the Warn Power Plant
- Light tabs included for accessory lights
- Black powder coat, made in the U.S.A.
Choosing a winch bumper
A winch bumper carries recovery loads through the front of the vehicle, so the mounting points and the bumper body need to work together. Winch size, cable length and fairlead position all affect how the load is applied. A larger winch adds weight at the front, which changes how the front suspension responds, so consider the winch you plan to use before buying the bumper.
Recovery accessories such as shackles, soft shackles and straps should be rated for the load you expect. Inspect the winch cable and fairlead for fraying or wear after each recovery, and keep the hardware tight, because recovery loads can loosen fasteners quickly on trail.
- Match winch size to the bumper
- Check fairlead and cable for wear
- Use rated recovery shackles
- Retighten hardware after trail use
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-4010 |
| UPC | 70000556235 |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4 inch |
| Finish | Black powder coat |
| Winch mount | Included |
| Light mounts | Included (light tabs) |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
The RH-4010 fits the 1976–1983 Jeep CJ5, 1976–1986 CJ7, 1981–1985 Scrambler, 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler (LJ).
Confirm fit for your vehicle’s year, model and trim before ordering, especially for 2007 and newer Wrangler JK models.
Installation notes
Installation reuses the factory hardware, and no cutting of the factory frame is needed. The D-rings themselves are not included, so have shackles on hand.
What’s included
- Front bumper with winch mount and grille guard
- Light tabs
- D-ring mount
Not included: Winch and D-rings.






















