Overview
The JcrOffroad Crusader Mid Width Front Winch Bumper, part number SWBFCTJ-T-P, is a black powder-coated steel winch bumper for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Wrangler Unlimited (LJ). JcrOffroad designed the Crusader for drivers who want improved clearance but still want some fender protection.
The bumper is CNC cut and formed from 3/16 inch steel with two 3/4 inch thick shackle tabs and a recessed winch mount. It accepts aftermarket 3×3 cube LED lights and has built-in Hi-Lift jack points.
Key features
- Mid width: improved clearance with fender protection
- CNC cut and formed from 3/16 inch steel
- Two 3/4 inch thick shackle tabs
- Recessed winch mount, 10 inch x 4.5 inch bottom foot profile
- Compatible with the Warn Zeon and Warn Powerplant winches
- Accepts aftermarket 3×3 cube LED lights
- Built-in Hi-Lift jack points
- Made in the U.S.A.
Choosing a winch setup
A winch bumper carries the weight of a winch and takes the load when a vehicle is pulled from mud, sand or a rock ledge, so the mounting points matter as much as the steel. Before buying a winch for this bumper, check that its mounting plate matches the recessed winch mount and the 10 inch x 4.5 inch bottom foot profile. A winch with a larger body may need clearance behind the bumper face, and the wiring should be routed away from moving suspension parts.
Light mounts and D-ring points are often added at the same time. Mount cube lights with the wiring protected from the bumper edges, and keep the battery cable and the winch control line clear of the steering components. After the first few trail runs, check the shackle tabs, the bolts into the frame and the welds for cracks or loose hardware.
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | SWBFCTJ-T-P |
| UPC | 700007277161 |
| Product type | Front winch bumper |
| Style | Crusader, mid width |
| Material | Steel, 3/16 inch |
| Finish | Black powder coat |
| Shackle tabs | 2, each 3/4 inch thick |
| Winch mounting profile | 10 inch x 4.5 inch bottom foot |
| Winch mount | Included, recessed |
| D-ring mount | Included |
| Light mounts | Included, for 3×3 cube LED lights |
| Fit type | Direct fit |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ), covering SE, Sport, Sahara, Rubicon, X and the 65th Anniversary Edition, and the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon form.
Fit is limited to those years, so check your year, model and trim before ordering. The YJ and 2007-and-newer JK fall outside the years above.
What’s included
The bumper with two shackle tabs and a recessed winch mount. The winch and the LED lights are not included.
























