Jeep Willys CJ-5 Suspension
49 suspension listed for the 1955–1958 Jeep Willys CJ-5
Every part on this page is listed by its maker for this model; the most represented brands are Skyjacker, Omix-Ada and Crown Automotive. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 49 resultsSorted by popularity
-
Leaf Spring Shackle Kit
Warrior Greaseable Shackles – 13190
- Lists the 1959–1975 Jeep CJ5 (Base, Renegade) and 1955–1958 Jeep Willys CJ-5
- Hardened bolts with greaseable fittings and polyurethane bushings
- 1/2 inch of lift at the front or rear
- Includes lock nuts and drilled sleeves where needed
- Gray hammertone finish; sold in pairs; part number 13190
SKU: W/I13190 -
-
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8023
- Rear Skyjacker Softride Nitro shock, part number N8023
- Rear position; can be used at the front or rear
- Fits a broad range of trucks, SUVs and Jeeps from 1955 to 2005
- Lift height w/1 – 2.5 in. Lift
- For suspension lifts only; will not lift the vehicle
SKU: SKYN8023 -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J34RS
- Fits Jeep CJ5 and CJ6 (1959–1960, 1966–1975) and Willys CJ-5 and CJ-6 (1955–1958) per the manufacturer list
- Rear Softride leaf spring, part number J34RS, sold as a single spring
- American steel with shot-peened leaves
- Lift height range 0 to 4.99 inches; for use with 3.5-4 inch lifted springs
SKU: SKYJ34RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J34FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring for 3.5 to 4 inch lifted springs
- Requires additional SKYSE34J bushings
- Skyjacker part number J34FS, American steel
SKU: SKYJ34FS -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J32RS
- Rear Softride leaf spring for 1959–1960 and 1966–1975 Jeep CJ5 and CJ6, and 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
- Use with 2-2.5 inch lifted springs; sold individually.
- Bushings not included per the short bullets.
- Lift height range 0 to 4.99 inches; part number J32RS, UPC 803696144078.
SKU: SKYJ32RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J32FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring, lift height range 0 to 4.99 inches
- Use with 2-2.5 inch lifted springs
- Skyjacker part number J32FS, American steel
SKU: SKYJ32FS -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7012
- Rear Softride Hydro shock absorber, part number H7012, for 0 to 2.5 in. lifts
- Fitment list runs from 1955 to 2009 and covers many older trucks, SUVs and Jeeps
- Collapsed length 12.07 in., extended length 19.07 in., 7 in. stroke
- Includes red polyurethane bushings and a red boot
SKU: SKYH7012 -
-
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9512
- Skyjacker M95 Performance rear gas monotube shock, part number M9512
- Listed fitment includes Jeep CJ, Wrangler YJ, Ford Bronco and Chevrolet and GMC trucks
- Nitro gas monotube design with 46mm bore and internal bump stop
- Includes shock boot; listed lift or drop 0 in
SKU: SKYM9512 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7058
- Skyjacker Softride Hydro rear shock, part number H7058
- Listed fitment spans Chevrolet, Dodge, Ford, GMC, Jeep, Mazda, Mitsubishi, Nissan and Toyota models
- Hydraulic twin tube with 5/8 inch hardened double chrome rod
- Designed for 3.5 to 5 in suspension lift kits and can be used front or rear
SKU: SKYH7058 -
-
-
Leaf Spring Shackle Kit
Rugged Ridge Heavy-Duty Shackles – 18265.03
- Rugged Ridge 18265.03 steel leaf spring shackles, sold as a pair
- Adds 1 inch of lift for listed Jeep CJ3, CJ5 and CJ6 models and Willys CJ-3, CJ-5 and CJ-6 models
- Greaseable design with black bushings included
- Listed location is front or rear; bolt-on, direct fit
SKU: RUG18265.03 -
-
-
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55113
- Fits many Chevrolet, GMC, Jeep, Ford, Toyota and Nissan models from 1943 to 2011 per the manufacturer fitment list
- Rear position, direct fit, gas charged
- Part number RS55113, UPC 10039703006290
- Lift height w/0 in. Lift/Drop
SKU: RANRS55113 -
-
Leaf Spring
Rancho 2.5 Inch Leaf Spring – RS44062
- Front 2.5 inch leaf spring for 1959–1975 Jeep CJ5 and CJ6, 1966–1968 CJ6A and 1955–1958 Willys CJ-5 and CJ-6
- Rancho part number RS44062, UPC 39703440622
- Lift height range 0 to 4.99 inches
- Rubber bushings included; sold individually, two required
SKU: RANRS44062 -
-
