Overview
The Warrior 13190 is a greaseable leaf spring shackle kit, part number 13190, for the 1959–1975 Jeep CJ5 (Base, Renegade) and the 1955–1958 Jeep Willys CJ-5. Its hardened bolts have greaseable fittings, and the kit uses polyurethane bushings.
The kit gives 1/2 inch of lift at the front or rear. The shackle design allows a lift from 1/2 inch to 2-1/2 inch depending on the application, and it creates immediate lift for clearing oversize tires.
Key features
- Hardened bolts with greaseable fittings
- Polyurethane bushings
- Lock nuts included, with drilled sleeves where needed
- 1/2 inch of lift at the front or rear
- Gray hammertone finish, sold in pairs
Greasing and bushing life
Greaseable pivots keep the shackle moving freely, and polyurethane bushings reduce noise while allowing the spring to flex. Together they make a shackle kit easier to maintain than one with plain bushings. Clean the bolt fittings before greasing them, and use a suspension grease. Bushings can wear over time, so check them for splits, cracks or a loose fit.
A greaseable kit still needs regular inspection. Wipe away road grime before greasing so dirt is not forced into the pivot. Listen for squeaks or clunks at the shackle, and look for uneven wear on the bushings when the vehicle is raised. Check drilled sleeves where they are used, since a sleeve that is not seated correctly can change the pivot’s movement and wear the bushing faster.
Specifications
| Brand | Warrior |
|---|---|
| Part number | 13190 |
| UPC | 63414613190 |
| Lift | 1/2 inch at the front or rear; 1/2 inch to 2-1/2 inch depending on application |
| Bushings | Polyurethane |
| Bolts | Hardened, with greaseable fittings |
| Included hardware | Lock nuts, drilled sleeves where needed |
| Finish | Gray hammertone |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list names the 1959–1975 Jeep CJ5 (Base, Renegade) and the 1955–1958 Jeep Willys CJ-5.
Jeep CJ7 and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes lock nuts, polyurethane bushings and drilled sleeves where needed. Confirm whether your application needs drilled sleeves before starting.
Secure the vehicle on stands before loosening any suspension bolts.
What’s included
Lock nuts, polyurethane bushings, drilled sleeves (where needed), hardened bolts with greaseable fittings, sold as a pair.









