Overview
The Rugged Ridge 18265.04 is a pair of steel heavy-duty greaseable leaf spring shackles with red bushings for older Jeep CJ and Willys models, and adds 1 inch of lift.
The shackles are easy to grease and are a direct fit, bolt-on application. They can be installed at the front or the rear of the vehicle.
A leaf spring shackle is the link at the end of a leaf spring that lets the spring change length as the suspension moves. Replacing the original shackles with a longer pair changes the spring angle and raises that end of the vehicle slightly, which is how this pair adds 1 inch of lift.
The greaseable design lets the shackle pivots be lubricated during normal maintenance, which can help the bushings last. They fit several early Jeep CJ and Willys models, and for the CJ5 they cover the Base and Renegade trims.
Key features
- Steel heavy-duty shackles
- Greaseable
- Red bushings
- Adds 1 inch of lift
- Front or rear use
- Supplied as a pair
- Direct fit, bolt-on application
Greasing and inspection
Leaf spring shackles let the spring change length as the suspension moves, so they carry a lot of repeated movement at the pivot. Grease helps reduce friction and wear in the bushing, and a greaseable design makes that maintenance possible without taking the spring apart. Keeping the pivots lubricated is one of the simplest ways to slow down wear.
Inspect the shackles regularly for play, cracks and uneven ride height from side to side. Replacing a shackle usually means checking the spring eye and the frame hanger as well. Always support the axle before loosening the old shackles, and follow the same tightening steps on both sides.
- Grease the pivots at regular intervals
- Check for play when the vehicle goes over bumps
- Inspect the spring eye and frame hanger during replacement
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18265.04 |
| UPC | 804314128593 |
| Product type | Leaf spring shackle kit |
| Material | Steel |
| Bushings | Red |
| Service | Greaseable |
| Lift | 1 inch |
| Location | Front or rear |
| Quantity | Supplied as a pair |
| Fit type | Direct fit, bolt-on |
Vehicle fitment
The manufacturer fitment list for the Rugged Ridge 18265.04 covers the 1959–1960 and 1966 Jeep CJ3, the 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade) and CJ6, and the 1955–1958 Jeep Willys CJ-3 and CJ-5 and the 1956–1958 Willys CJ-6.
this product does not cover the later CJ7 or the Wrangler models. Model years listed are not continuous, so check your exact year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect steering, braking and handling, so professional installation is recommended. Support the vehicle on jack stands rather than a jack alone, torque every fastener to the correct specification, and recheck the torque after the first miles of driving. Have the alignment checked after any suspension work, and check local regulations on vehicle height. Grease the shackles as the instructions direct.
What’s included
- Pair of steel leaf spring shackles with red bushings












