Overview
The Skyjacker J34RS is a rear Softride leaf spring for lifted Jeep CJ5 and CJ6 vehicles, sold individually. It fits 1959 to 1960 and 1966 to 1975 Jeep CJ5 and CJ6 models, and 1955 to 1958 Willys CJ-5 and CJ-6 models. It is intended for use with 3.5-4 inch lifted springs.
Each spring is made from American steel, and every leaf is shot-peened with hardened steel pellets at high velocity. Shot peening compresses the surface of the steel and raises its tensile strength, which supports greater wheel travel and ride quality. It is a direct fit for the rear position.
Key features
- Rear position Softride leaf spring, sold as a single spring
- American steel leaves, each shot-peened with hardened steel pellets
- Built for use with 3.5-4 inch lifted springs
- The lift range runs from 0 to 4.99 inches.
- A direct fit for the rear position.
Before rear spring replacement
Replacing a rear leaf spring involves a heavy axle and stored spring tension, so the job calls for a solid plan. Support the axle with stands, use the right tools and keep the jack in place only as a backup. Take the time to photograph the spring pack and hardware before disassembly so reassembly goes smoothly.
A rear spring that has taken a set can leave one side lower than the other, and uneven sag shows up as a lean or a tracking issue. Replacing springs in pairs helps keep the rear level and the ride consistent. Once the new spring is in, check the U-bolts and shackle hardware after the first drives.
- Use jack stands and never rely on a jack alone
- Photograph the spring pack and hardware before removal
- Check U-bolts and shackle hardware after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | J34RS |
| UPC | 803696144153 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings included | Rubber bushings (per specifications) |
| Lift height range | 0 to 4.99 inches |
| Material | American steel, shot-peened leaves |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1959 to 1960 and 1966 to 1975 Jeep CJ5 models in the Base and Renegade trims, 1959 to 1960 and 1966 to 1975 Jeep CJ6 models in the Base trim, 1955 to 1958 Jeep Willys CJ-5 models and 1956 to 1958 Jeep Willys CJ-6 models.
The list does not cover the 1976–1983 Jeep CJ5, the Jeep CJ7 or the Jeep Scrambler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The specifications list rubber bushings as included, but the product note says bushings are not included. Check what came in the box before assembly, and have a bushing set ready if none came with the spring.
Replacing a leaf spring means lifting and supporting the rear axle, so use jack stands and proper tools, and never work under a vehicle held only by a jack.
What’s included
One rear leaf spring, sold as a single spring.
Not included: Bushings. Check the kit contents before assembly, since the bushings may need to be sourced separately.







