Overview
The Skyjacker H7012 is a rear Softride Hydro shock absorber rated for suspension lifts from 0 to 2.5 inches. Its manufacturer fitment list covers a wide range of older trucks, SUVs and Jeeps from 1955 to 2009.
It is a hydraulic twin tube shock with a 5/8 inch hardened double chrome rod. It has a collapsed length of 12.07 in., an extended length of 19.07 in. and a 7 in. stroke. It offers a street-oriented ride that remains firm enough for most off-roading and is suited to most Skyjacker kits.
Key features
- Hydraulic action with multi-stage velocity sensitive valving
- Internal rebound bumper and oversize piston head
- Expanded fluid reservoir to reduce foaming
- Heavy-duty twin tube construction with variable resistance
- Finished in heavy mileage white paint with minimum 240-salt protection.
- Red polyurethane bushings and a red boot
Choosing the right lift setup
Shock length matters as much as damping. A shock that is too short for the suspension travel can bottom out, while one that is too long can be stretched at full droop. Before buying, measure the current unit at both ends of its travel, compare those figures with the new shock, and confirm that the truck’s lift falls within the shock’s range.
Older trucks and Jeeps often have worn mounting eyes, seized hardware and bushings that have dried out. Replacing the shock is a good moment to inspect the mounts, bump stops and springs, since a worn bump stop can shorten shock life. Use fresh hardware, keep the rubber boot clean and check it for cracks after washing the truck, and tighten fasteners once the vehicle is back on its wheels.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7012 |
| UPC | 803696134628 |
| Series | H7000 (Hydro Series) |
| Position | Rear |
| Lift range | 0 to 2.5 in. lift (lift spec reads 0 in. lift/drop) |
| Collapsed length | 12.07 in. |
| Extended length | 19.07 in. |
| Shock stroke | 7 in. |
| Rod | 5/8 in. diameter, hardened, double chrome |
| Finish | Heavy mileage white paint, minimum 240-salt protection |
| Bushings and boot | Red polyurethane bushings, red boot |
| Action | Hydraulic |
| Quantity | Sold individually |
Vehicle fitment
The manufacturer list is long and mostly covers older vehicles: Chevrolet Blazer (1969 to 1972) and C10, C20 and C30 pickups (1963 to 1973); Dodge D300 (1961 to 1974) and Raider (1989); Ford Bronco (1966 to 1979), Bronco Sport (1975 to 1977) and F-100 (1966 to 1969 and 1973 to 1976); GMC C15, C25 and C35 pickups (1967 to 1973), K35 (1969) and Jimmy (1970 to 1972); International Scout (1961 to 1971) and Scout II (1972 to 1980); Isuzu Pickup (1981 to 1992); Jeep CJ-5, CJ-6, CJ-7, Cherokee SJ, Commando, Gladiator, Grand Wagoneer, J10, J20, Jeepster, Scrambler, Wagoneer and Wrangler YJ; Mazda B2000 and B2200 (1986 to 1993); Nissan Armada (2005 to 2009); Suzuki Samurai (1986 to 1991); and Toyota Land Cruiser (1967 to 1984) and Pickup (1986 to 1995).
The list ends in 2009 and does not include Jeep Wrangler TJ, Cherokee XJ or any newer trucks. Look up your exact year, make, model and trim in the list above before buying.
Installation notes
Skyjacker’s description says these shocks are for suspension lift kits only, while the lift spec reads 0 in. lift/drop, so confirm the lift your truck runs before installing. Shocks do not lift a vehicle, so they do not replace a lift kit.
What’s included
One rear shock with red polyurethane bushings and a red boot.
Not included: the opposite-side rear shock, since shocks are sold individually.









