Select your vehicle

Skyjacker Softride Leaf Spring – J32FS

Skyjacker

$158.54In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 1:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
  • Front single leaf spring, lift height range 0 to 4.99 inches
  • Use with 2-2.5 inch lifted springs
  • Skyjacker part number J32FS, American steel

Description

Overview

The Skyjacker J32FS is a front Softride leaf spring for Jeep CJ5 models from 1959 to 1960 and 1966 to 1975, Jeep CJ6 models from 1959 to 1960, and Willys CJ-5 and CJ-6 models from 1955 to 1958. It works with 2 to 2.5 inch lifts and has a lift height range of 0 to 4.99 inches.

The spring is made from American steel, and each leaf is shot-peened with hardened steel pellets. That process adds strength to the steel and supports long spring life at full wheel travel. Check the kit contents against your installation before starting.

Key features

  • American steel construction
  • Shot-peened leaves
  • Front position, single spring
  • It is intended for use with 2 to 2.5 inch lifted springs.
  • Lift height range of 0 to 4.99 inches
  • Direct fit designation

Older CJ front suspension

Early CJ front ends rely on leaf springs for ride height, load support and axle location, so wear in the spring pack shows up quickly as sag or wander. Older vehicles often have seized or worn hardware, which can make a new spring hard to seat. Clean the hangers and check the mounting points before the new spring goes in.

Because these vehicles are often driven on mixed terrain, the front spring is tested by impacts and articulation more than by highway load. A spring installed with the wrong lift in mind can change steering geometry and tire contact. Recheck alignment and the condition of the steering components after the first drives.

  • Clean and inspect spring hangers before installation
  • Check shackles and pins for seized or worn parts
  • Recheck alignment after the first drives

Specifications

Brand Skyjacker
Part number J32FS
UPC 803696144030
Product type Softride leaf spring, front
Spring quantity Single spring
Material American steel
Leaf treatment Shot-peened
Bushings Conflicting details: one line says not included, another lists rubber bushings included
Lift height range 0 to 4.99 inches
Use with 2-2.5 inch lifted springs
Fitment type Direct fit

Vehicle fitment

It fits Jeep CJ5 models from 1959 to 1960 and 1966 to 1975 in the Base and Renegade trims, Jeep CJ6 models from 1959 to 1960 in the Base trim, and Willys CJ-5 models from 1955 to 1958 and Willys CJ-6 models from 1956 to 1958.

CJ5 model years from 1961 to 1965 and from 1976 onward, and CJ7 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the bushing details conflict, confirm with Skyjacker whether bushings are supplied before fitting the spring. Lifts of 2 to 2.5 inches require the spring to match the stated lift range.

What’s included

One Skyjacker Softride front leaf spring, part number J32FS.

Not included: bushings, unless Skyjacker confirms they ship with the spring.

SKU: SKYJ32FS Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 40.00 × 2.00 × 2.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51959–1960, 1966–1975Base, Renegade
Jeep CJ61959–1960, 1966–1975Base
Jeep Willys CJ-51955–1958All
Jeep Willys CJ-61956–1958All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Skyjacker J32FS fit a Jeep CJ5?

Yes, for the years listed: 1959 to 1960 and 1966 to 1975 CJ5 models in the Base and Renegade trims. Skyjacker also lists 1959 to 1960 CJ6 and 1955 to 1958 Willys CJ-5 and CJ-6 models. Confirm your year and trim before ordering.

Does the J32FS include bushings?

Confirm whether bushings come with your order before starting, and check the kit contents against your installation. Plan the install around whatever the kit actually contains.

What lift does the J32FS work with?

Skyjacker says use with 2-2.5 inch lifted springs, and the listed lift height range is 0 to 4.99 inches. It is a front single spring made from American steel with shot-peened leaves, labeled as a direct fit.

Do shackles and bushings usually get replaced with a front leaf spring?

Often, yes. Worn shackles and eye bushings can cause sag, clunks and uneven height. Replacing them during the spring swap keeps the new spring seated correctly and avoids repeat work.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon