Overview
The Skyjacker M95 Performance Monotube Shock Absorber M9512 is a rear gas-charged monotube shock for light trucks, Jeeps and SUVs. It works at a 0 in lift or drop, and its fit covers a wide range of Jeep CJ and Wrangler YJ, Ford Bronco, Chevrolet, GMC and International models across several decades.
The M95 is a single tube design. It uses high pressure nitrogen gas with a floating piston, which helps keep operating temperatures cooler under extreme conditions. A large 46mm bore, an internal bump stop and 180 degree directional mounting complete the shock.
Key features
- Single tube gas monotube design
- High pressure nitrogen gas with floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Includes shock boot
Gas monotube basics
A gas monotube shock uses a single tube with a floating piston separating the oil from pressurized nitrogen. This layout helps the shock resist foaming when it works hard, which is why monotube designs are common on trucks that see rough trail use and steady highway speeds.
Because the gas charge is sealed, the shock should not be opened or serviced in the field. Inspect the body for dents and check the gas seal for leaks, since a dented tube can bind the piston. Keep the boot in place so grit does not reach the rod seal.
- Check the shock boot for tears
- Inspect the mounting eyes and bushings
- Look for oil on the outer tube
- Confirm the directional mounting matches the bracket
Specifications
| Brand | Skyjacker |
|---|---|
| Shock series | M95 Performance, M95 Series |
| Part number | M9512 |
| UPC | 803696211671 |
| Position | Rear |
| Lift or drop | 0 in |
| Damping | Gas charged |
| Construction | Nitro gas monotube |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degree directional |
| Boot | Included |
Vehicle fitment
It fits Jeep CJ2 through CJ7 models, Wrangler (YJ) from 1987 to 1995, Jeep Cherokee SJ, Wagoneer SJ, Grand Wagoneer, J10 and J20, Gladiator, Commando, Jeepster, Scrambler and Willys models, plus Ford Bronco and F-100, Chevrolet and GMC pickups, Dodge and Mazda trucks, International Scout models, Isuzu Pickup, Nissan Armada and Suzuki Samurai.
The list does not include Ford F-150 trucks or Wrangler TJ and JK models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The M95 is directional, with 180 degree mounting, so check the orientation of the shock against your mounting points before fitting it. Support the vehicle on jack stands while working on the rear suspension.
What’s included
One rear shock absorber with a shock boot.








