Overview
The Skyjacker J32RS is a rear Softride leaf spring for early Jeep CJ5 and CJ6 vehicles, sold individually. It fits 1959 to 1960 and 1966 to 1975 Jeep CJ5 and CJ6 models, plus 1955 to 1958 Willys CJ-5 and 1956 to 1958 Willys CJ-6 models. It is designed for use with 2-2.5 inch lifted springs.
The spring is made from American steel, and its leaves are shot-peened for strength. The position is rear, the lift height range is 0 to 4.99 inches, and it is a direct fit. Confirm the bushing kit contents before ordering or installing.
Key features
- Rear position leaf spring, sold individually.
- American steel, with shot-peened leaves.
- Recommended for use with 2-2.5 inch lifted springs.
- Direct fit, 0 to 4.99 inch lift height range.
- Single spring per part number.
Early CJ rear spring care
Rear springs on early CJ vehicles set rear height and locate the axle, so their condition affects ride, steering stability and how the rear tires wear. Changes in height also shift pinion angle, which can cause driveline vibration if left unchecked. Once the spring is installed, check the driveline angles and make sure the axle sits square in the frame.
Older chassis often show fatigue that is easy to miss. Look for cracked leaves, a side that sags lower than the other, and worn spring perches or U-bolts. Replacing the hardware along with the spring is a practical step, because worn parts can loosen and let the new spring move out of position.
Use proper stands to support the vehicle and the axle during removal. Keep fingers clear of the spring eye and bushing area when the old spring comes out, since these parts are heavy and can shift suddenly.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | J32RS |
| UPC | 803696144078 |
| Position | Rear |
| Spring type | Leaf (Softride) |
| Spring quantity | Single spring |
| Bushings | Conflicting: short bullets say not included, specification table says rubber bushings included |
| Lift height range | 0 to 4.99 inches |
| Recommended lift springs | 2-2.5 inch lifted springs |
| Material | American steel, shot-peened leaves |
| Fitment | Direct fit |
Vehicle fitment
The list covers 1959–1960 and 1966–1975 Jeep CJ5 models (Base and Renegade trims), 1959–1960 and 1966–1975 Jeep CJ6 models (Base trim), 1955–1958 Jeep Willys CJ-5 and 1956–1958 Jeep Willys CJ-6.
Jeep CJ models from the 1976 model years onward and CJ7 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear springs change ride height and pinion angle, so check the driveline angles once the spring is installed. The bushing details differ between the bullets and the specifications, so verify the bushing kit before starting. Use stands for support during the job.
What’s included
One rear Softride leaf spring, sold individually.
Not included: Check the bushing kit contents against your installation before starting.





