Jeep CJ6 Suspension
45 suspension listed for the 1959–1975 Jeep CJ6
Every part on this page is listed by its maker for this model; the most represented brands are Skyjacker, Omix-Ada and Rancho. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 45 resultsSorted by popularity
-
-
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9512
- Skyjacker M95 Performance rear gas monotube shock, part number M9512
- Listed fitment includes Jeep CJ, Wrangler YJ, Ford Bronco and Chevrolet and GMC trucks
- Nitro gas monotube design with 46mm bore and internal bump stop
- Includes shock boot; listed lift or drop 0 in
SKU: SKYM9512 -
-
Shock Absorbers
Rancho Shock Absorber – RS55119
- Fitment list covers 1956 to 1995 Jeep CJ, Commando and Jeepster models, Dodge D300 and W300, International Scout and Toyota Land Cruiser
- Direct fit, gas charged, lift height w/0 – 3 in. Lift
- Part number RS55119, UPC 10039703006313
- Mounting position to confirm before fitting
SKU: RANRS55119 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55113
- Fits many Chevrolet, GMC, Jeep, Ford, Toyota and Nissan models from 1943 to 2011 per the manufacturer fitment list
- Rear position, direct fit, gas charged
- Part number RS55113, UPC 10039703006290
- Lift height w/0 in. Lift/Drop
SKU: RANRS55113 -
-
Leaf Spring
Rancho 2.5 Inch Leaf Spring – RS44062
- Front 2.5 inch leaf spring for 1959–1975 Jeep CJ5 and CJ6, 1966–1968 CJ6A and 1955–1958 Willys CJ-5 and CJ-6
- Rancho part number RS44062, UPC 39703440622
- Lift height range 0 to 4.99 inches
- Rubber bushings included; sold individually, two required
SKU: RANRS44062 -
Leaf Spring Shackle Kit
Mountain Off Road Enterprises Greaseable Shackles – LS9033
- Mountain Off Road Enterprises LS9033 greaseable shackles for 1959-1975 Jeep CJ5 and CJ6
- Cut from 3/8 inch thick steel plate with a thick walled center brace
- Grade 5 hardware and zinc plated gold finish
- Front or rear location
SKU: MRELS9033 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 918509
- Front position gas charged twin tube shock from the ES9000 Series
- Fits Jeep CJ models from 1946 to 1981, Scout, Land Rover and other older 4x4s
- Extended length 18.59 in, collapsed length 11.70 in, travel 6.89 in
- Loop-style upper and lower mounts, white finish, not adjustable
- Shock boot sold separately
SKU: EXP918509 -
Shackle Reversal Kits
Daystar 1.25 Inch Lift Greasable Super Shackles – KJ61002BK
- Fits Jeep CJ3, CJ5, CJ5A, CJ6 and CJ6A, plus Willys CJ-2 through CJ-6 models
- Lift height reads 1.25 inch in the title and 1-1/2 inch in the highlights
- Greasable kit with bushings, sleeves and rifle drilled bolts
- Zinc plated, fully welded round tube, sold as a pair
SKU: DAYKJ61002BK -
Shackle Reversal Kits
Daystar 1.5 Inch Lift Non-Greaseable Super Shackles – KJ60002
- Fits 1949–1975 Jeep CJ models, including CJ3, CJ5, CJ6 and Willys CJ-2 to CJ-6
- 1.5 inch lift at the front and rear
- Non-greaseable design that keeps the factory bushings
- Zinc-plated finish, sold in pairs
- Part number KJ60002, UPC 814423011518
SKU: DAYKJ60002 -
-
Leaf Spring Plate
Crown Automotive Front Spring Plate – J0800823
- Crown Automotive J0800823 factory style front passenger side spring plate
- Fits Jeep CJ3, CJ5, CJ5A, CJ6, CJ6A and Willys CJ models
- Front position; listed fitment type reads universal fit
- Manufacturer fitment list covers 1946–1971 models
SKU: CROJ0800823 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8023
- Rear Skyjacker Softride Nitro shock, part number N8023
- Rear position; can be used at the front or rear
- Fits a broad range of trucks, SUVs and Jeeps from 1955 to 2005
- Lift height w/1 – 2.5 in. Lift
- For suspension lifts only; will not lift the vehicle
SKU: SKYN8023 -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J34RS
- Fits Jeep CJ5 and CJ6 (1959–1960, 1966–1975) and Willys CJ-5 and CJ-6 (1955–1958) per the manufacturer list
- Rear Softride leaf spring, part number J34RS, sold as a single spring
- American steel with shot-peened leaves
- Lift height range 0 to 4.99 inches; for use with 3.5-4 inch lifted springs
SKU: SKYJ34RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J34FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring for 3.5 to 4 inch lifted springs
- Requires additional SKYSE34J bushings
- Skyjacker part number J34FS, American steel
SKU: SKYJ34FS -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J32RS
- Rear Softride leaf spring for 1959–1960 and 1966–1975 Jeep CJ5 and CJ6, and 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
- Use with 2-2.5 inch lifted springs; sold individually.
- Bushings not included per the short bullets.
- Lift height range 0 to 4.99 inches; part number J32RS, UPC 803696144078.
SKU: SKYJ32RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J32FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring, lift height range 0 to 4.99 inches
- Use with 2-2.5 inch lifted springs
- Skyjacker part number J32FS, American steel
SKU: SKYJ32FS -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7012
- Rear Softride Hydro shock absorber, part number H7012, for 0 to 2.5 in. lifts
- Fitment list runs from 1955 to 2009 and covers many older trucks, SUVs and Jeeps
- Collapsed length 12.07 in., extended length 19.07 in., 7 in. stroke
- Includes red polyurethane bushings and a red boot
SKU: SKYH7012 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7058
- Skyjacker Softride Hydro rear shock, part number H7058
- Listed fitment spans Chevrolet, Dodge, Ford, GMC, Jeep, Mazda, Mitsubishi, Nissan and Toyota models
- Hydraulic twin tube with 5/8 inch hardened double chrome rod
- Designed for 3.5 to 5 in suspension lift kits and can be used front or rear
SKU: SKYH7058 -
-
-
Leaf Spring Shackle Kit
Rugged Ridge Heavy-Duty Shackles – 18265.03
- Rugged Ridge 18265.03 steel leaf spring shackles, sold as a pair
- Adds 1 inch of lift for listed Jeep CJ3, CJ5 and CJ6 models and Willys CJ-3, CJ-5 and CJ-6 models
- Greaseable design with black bushings included
- Listed location is front or rear; bolt-on, direct fit
SKU: RUG18265.03
