Ford Explorer Shock Absorbers
36 shock absorbers listed for the 1991–2026 Ford Explorer
Every part on this page is listed by its maker for this model; the most represented brands are Pro Comp Suspension, Skyjacker and Rancho. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 36 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Rancho RS5000X Series Shock Absorber – RS55185
- Rancho RS5000X rear shock RS55185 for 1991-2003 Ford Explorer and related models
- Also listed: Explorer Sport, Sport Trac, Mazda Navajo and Mercury Mountaineer
- Twin tube, gas pressurized, 2.25 inch body; 25.42 inch extended, 15.51 inch compressed
- Bar pin top mount and eyelet bottom mount
SKU: RANRS55185 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999185
- Fits 1991–2001 Ford Explorer models, plus Explorer Sport Trac, Mazda Navajo and Mercury Mountaineer in the covered years
- Rear position, direct fit, 0 to 1.5 in. lift range
- 2.75-in. (70mm) body with 18mm chrome rod
- Nine-position manual or remote tuning
- Protective boot included
SKU: RANRS999185 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 924509
- Rear ES9000 Series gas charged twin tube shock with loop mounts at both ends
- Fits many Chevrolet, GMC, Ford, Dodge, Jeep, Toyota, Isuzu, Mazda and Mercury trucks and SUVs
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Rated for a 2.5 to 4 in lift
- Shock boots sold separately
SKU: EXP924509 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-021319
- Front position for the 1995–2005 Ford Explorer, 1995–2001 Ford Explorer Sport (Base) and 1997–2001 Mercury Mountaineer (Base)
- Bilstein 46mm front gas-charged monotube shock, part number 24-021319
- Yellow finish with a stated lift height of w/0 – 3 in. Lift
- Old part numbers BILF4-B46-2131-H1 and BILF4-B46-2131-H2 are cross-referenced
SKU: BIL24-021319 -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 918515B
- Fits 1995–2001 Ford Explorer, F-150, F-250 and Ranger
- Also fits the 1995 and 1999–2001 F-150 Lightning
- 18.7-inch extended length, 11.5-inch collapsed length
- 7.06-inch travel
- Stem upper mount, loop lower mount
SKU: EXP918515B -
-
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 918595
- Front ES9000 Series gas charged twin tube shock
- Fits Ford Explorer, Explorer Sport, Explorer Sport Trac, Ranger and Mercury Mountaineer models in the covered years
- Extended length 18.59 in and collapsed length 11.70 in
- Factory upper and lower mounts, white finish
- Shock boot not included
SKU: EXP918595 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 918515
- Front ES9000 Series gas charged twin tube shock, sold as each
- Fits the 1995 to 2011 Ford Explorer, F-150, F-150 Lightning and Ranger models in the covered years
- Extended length 18.66 in, collapsed length 11.52 in, travel 7.14 in
- Lift range 0 to 3 in, factory upper and lower mounts
- Shock boot not included
SKU: EXP918515 -
-
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-021340
- Rear position for the 1995–2001 Ford Explorer, 1995–2001 Explorer Sport Base, 2001–2005 Explorer Sport Trac and 1997–2000 Mercury Mountaineer Base
- Bilstein 4600 Series rear gas-charged monotube shock, part number 24-021340
- 2 in body diameter, yellow finish, boots included
- Lift height rated at w/0 in. Lift/Drop
SKU: BIL24-021340 -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – 24-021333
- Front position for the 1995–2001 Ford Explorer, 1995–2001 Explorer Sport Base, 2001–2005 Explorer Sport Trac and 1997–2000 Mercury Mountaineer Base
- Bilstein 4600 Series front gas-charged monotube shock, part number 24-021333
- 2 in body diameter, yellow finish, boots included
- Stock height with a w/0 in. lift/drop rating
SKU: BIL24-021333 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-021326
- Fits 1995–2001 Ford Explorer, 1995–2000 Explorer Sport, 2001–2005 Explorer Sport Trac and 1997–2001 Mercury Mountaineer per Bilstein’s entries
- Bilstein 4600 Series rear gas-charged monotube shock, part number 24-021326
- 2 in body diameter, yellow finish, boots included
- Stock height with a w/0 in. lift/drop rating
SKU: BIL24-021326 -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 924509B
- PRO-X twin tube shock, 24.9 in extended length
- Gas charged, nitrogen stabilized, 10 stage velocity sensitive valving
- Collapsed length 14.8 in, travel 10.05 in
- 5/8 in chrome hardened shaft with nylon banded piston
- Sold individually; shock boot sold separately
SKU: EXP924509B -
-
Shock Absorbers
Rancho 1.5 Inch Loaded QuickLIFT – RS999939
- Fits 2006–2010 Ford Explorer and 2006–2010 Mercury Mountaineer SUVs in the trims given below.
- 1.5 inch lift, front left position
- Gas charged assembly with strut, coil spring and upper mount
- Nine adjustable positions
- Compatible with the myRIDE Wireless Controller
SKU: RANRS999939 -
Shock Absorbers
Rancho 1.5 Inch Loaded QuickLIFT – RS999924
- 1.5 inch Loaded QuickLIFT, front right, part number RS999924
- Fits 2006–2010 Ford Explorer and 2006–2010 Mercury Mountaineer
- Strut, coil spring and upper mount supplied
- Gas charged with 9 adjustment positions
- Compatible with myRIDE Wireless Controller
SKU: RANRS999924 -
Shock Absorbers
Rancho RS5000 Series Strut – RS5754
- Rancho RS5754 gas-charged rear strut from the RS5000 Series
- Listed fitment: 2006–2010 Ford Explorer, 2007–2010 Ford Explorer Sport Trac, 2004–2005 Mercury Mountaineer
- Ten-stage velocity sensitive valving, 5/8-in. (16mm) piston rod, 1 3/8-in. (35mm) piston
- Red protective boot included
SKU: RANRS5754 -
Shock Absorbers & Shock Accessories
Skyjacker M95 Performance Monotube Shock Absorber – M9554
- M95 Performance monotube shock sold as each
- Nitrogen gas charge with an internal bump stop
- Large 46mm bore and 180 degree directional mounting
- Fits Ford, Dodge, Mazda, Nissan, Toyota and International trucks and SUVs, 1966 to 1997
SKU: SKYM9554 -
Shock Absorbers & Shock Accessories
Skyjacker Black MAX Shock Absorber – B8539
- Black MAX twin tube shock with a black boot
- 29.83 in. extended and 17.30 in. collapsed length
- Vehicle specific multi-stage valving and a sintered iron piston
- Fits 1987–1996 Dodge Dakota and 1991–1994 Ford Explorer and Mazda Navajo
- Limited lifetime warranty
SKU: SKYB8539 -
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 914515B
- Fits 1975–2000 Chevrolet, GMC, Dodge, Ford, Isuzu, Mazda, Mitsubishi and Toyota pickups and SUVs
- 14.7-inch extended length, 9.6-inch collapsed length
- 4.98-inch travel, 2.0-inch body
- Twin tube design with 10-stage velocity sensitive valving
- Universal location, front or rear
SKU: EXP914515B -
Shock Absorbers
Tuff Country SX8000 Shock Absorber – 61202
- Fits listed 1999-2007 Chevrolet Silverado and GMC Sierra 1500, plus Ford Bronco, F-150, Ranger and Explorer models
- Front twin-tube nitrogen gas shock for 2.5-4 inch lift
- 5/8 inch piston rod, polyurethane bushings
- Multi-Fit Hardware Pack included, two required per vehicle
SKU: T/C61202 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8055
- Front gas-charged Nitro shock, part number N8055, with stated collapsed and extended lengths
- Fits many 1966-2001 Ford Bronco, Jeep, Isuzu, Honda, Mazda and Toyota models
- 150 PSI nitrogen gas charge, twin tube construction, white body
- Rated for 2 – 6 in. lift, with a red polyurethane boot
SKU: SKYN8055 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8054
- Front gas-charged Nitro shock, part number N8054
- Fits a broad range of 1961-2016 Ford, Toyota, Dodge, Mazda, Nissan and Suzuki models
- 150 PSI nitrogen gas charge with multi-stage velocity sensitive valving
- Rated for 0 – 1 in. lift, with a red boot included
SKU: SKYN8054






















