Overview
The Rancho RS55185 is an RS5000X Series rear twin tube shock absorber for 1991-2003 Ford Explorer models, with additional listings for the Explorer Sport, Explorer Sport Trac, Mazda Navajo and Mercury Mountaineer. The shock is gas pressurized, with a bar pin top mount and an eyelet bottom mount.
The shock uses a rebound valving system and an advanced compression phase to improve handling on and off the road. It has progressive engagement valving, a tuned compression control valve and an enlarged twin tube body.
Key features
- Rear shock for 0 inch lift or drop, meaning stock ride height.
- Progressive engagement valving
- Tuned compression control valve
- Enlarged 2.25 inch twin tube body
- 16mm nitro-carburized rod and 35 mm bore
- 1-3/8 inch sintered iron piston with a glass-filled, Fluon banded piston
- Rebound bumper, protective boot and double-welded loops
- Low-friction, self-lubricating seal and black natural rubber bushings
Stock height and rear damping
Rear shocks on Explorer-style trucks and SUVs carry much of the day-to-day ride quality, so the damping curve matters on both pavement and trail. A twin tube design keeps the damping work separate from the gas charge, which helps it stay consistent over long drives. Good damping keeps the tires in contact with the ground and reduces wallowing, so the vehicle feels steadier in corners.
Stock ride height is the most common use for this type of shock. If the vehicle has been raised or lowered, confirm the shock length suits the new position before ordering. Bushings and bar pin mounts can wear and crack over time, so inspect them whenever the shock is replaced. Replacing rear shocks in pairs keeps the ride even, and it is a good time to check the springs, bump stops and suspension bushings.
- Check the eyelet and bar pin for wear
- Match left and right rear shocks
- Inspect bump stops during replacement
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55185 |
| Catalog part number | RANRS55185 |
| Product type | Shock absorber |
| Series | RS5000X |
| Position | Rear |
| Shock type | Twin tube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2.25 in |
| Bore | 35 mm |
| Rod | 16mm nitro-carburized |
| Piston | 1-3/8 inch sintered iron, glass-filled Fluon banded |
| Compressed length | 15.51 inches |
| Extended length | 25.42 inches |
| Travel length | 9.91 inches |
| Top mount | Bar pin |
| Bottom mount | Eyelet |
| Bushings | Black, natural rubber |
| Lift height | 0 in. lift/drop |
| Quantity | Single shock |
| Fit type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Rancho RS55185 covers the 1991-2003 Ford Explorer (Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS and XLT trims) and the 1991-2000 Ford Explorer Sport.
It also fits the 2001-2005 Ford Explorer Sport Trac (Adrenalin, Base, XL, XLS, XLT), the 1991-1994 Mazda Navajo (DX, LX) and the 1997-2001 Mercury Mountaineer (Base).
The list does not include Explorers after 2003, the Sport Trac after 2005 or the Mountaineer after 2001. The shock is a rear shock for stock ride height only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shocks control wheel movement and vehicle stability, so professional installation is a good choice. Support the vehicle on rated jack stands, and torque mounting hardware to the specified values.
Re-check the hardware after the first miles of driving. Replace shocks in axle pairs where the manufacturer advises it, and have the alignment and ride height checked after any suspension work.
What’s included
- One RS5000X rear shock
- Protective boot (listed among the features)
- Black natural rubber bushings
Not included: Mounting hardware and a second shock for the other side are not included. Confirm what you need before starting the install.









