Overview
The Pro Comp 914515B is a PRO-X twin tube shock absorber with a 14.7-inch extended length, a 9.6-inch collapsed length and 4.98 inches of travel. It fits a long run of 1975–2000 pickups and SUVs, mostly from Chevrolet, GMC, Dodge, Ford, Isuzu, Mazda, Mitsubishi and Toyota.
The PRO-X is a general-purpose twin tube design for trucks used mainly on pavement with occasional off-road trips. It uses 10-stage velocity sensitive valving, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft, so it is aimed at everyday ride quality rather than trail performance.
The location is universal rather than front or rear, and the shock has a stem upper mount and a loop lower mount. It is nitrogen stabilized and finished in black powder coat. The shock boot is an optional extra and is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Choosing the right setup
A twin tube shock controls how quickly the spring and axle settle after a bump, so the valving and piston together set how firm the ride feels. On a truck that sees mostly pavement, a gas charged design keeps damping steadier when the oil warms up on longer highway drives. Before choosing, compare the collapsed and extended lengths with the truck’s current ride height, since a sagging suspension changes the usable travel.
Older trucks often carry worn bushings, tired springs and bent mounts, and each of these can shorten the life of a new shock. Replacing both shocks on the same axle keeps handling even from side to side. When removing the old unit, inspect the body for oil seepage and look for cupped tire wear, which can point to a worn damper.
- Check mounting eyes for cracks or elongation
- Swap shocks in pairs on the same axle
- Re-check bolt torque after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914515B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 14.7 in |
| Collapsed length | 9.6 in |
| Travel length | 4.98 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits 1975–2000 Chevrolet C and K pickups, Silverado and Tahoe models in several years, Suburbans, GMC C and K series trucks, Dodge D-series pickups, the 1988–1999 Dodge Dakota and 1998–1999 Durango, the 1991–1994 Ford Explorer and 1988–1999 Ford Ranger, the Isuzu Pickup and Trooper, Mazda B-series trucks, the Mitsubishi Montero, and the Toyota Pickup and 1995–1999 Tacoma.
Silverado and Sierra 1500 models after 1999 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the list spans many different vehicles, confirm the mounting eyes on your vehicle match the stem upper and loop lower mounts before ordering. Check the 14.7-inch extended and 9.6-inch collapsed lengths against the ride height of your truck.
What’s included
One twin tube shock, with its black finish and stem upper mount. Shock boot is optional and not included.
Not included: the optional boot, plus any brackets your vehicle needs.









