Overview
The Rancho RS55374 is a front RS5000X Series shock absorber for the Ford Explorer, Explorer Sport, Explorer Sport Trac, Ranger and Mazda B2500, B3000 and B4000 trucks. It is built for a 1 – 2.5 in. lift.
Rancho credits the design to its patented rebound valving system and an advanced compression phase. The measured lengths are 13.97 in. compressed, 19.25 in. extended and 5.28 in. of travel.
Key features
- Patented rebound valving system
- Advanced compression phase
- Fits a 1 – 2.5 in. lift
- Direct-fit front position
Before you replace a shock
A shock absorber controls how quickly the springs compress and rebound, which keeps tires in contact with the ground over bumps and ruts. On a truck that sees trail use, the shock works hard on washboard roads and landings, so its valving and rod seal take regular abuse. Matching the old unit’s compressed and extended lengths is the most practical way to confirm a replacement will sit correctly in the suspension.
Front shocks are often replaced in pairs so that damping stays even from side to side. If one side is worn, the other usually is too, and mixing old and new units can leave the truck pulling or bouncing unevenly.
- Check the bushings and mounting hardware while the shock is off
- Inspect the rod for pitting or scoring
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55374 |
| UPC | 10039703008195 |
| Series | RS5000X Series |
| Position | Front |
| Fitment | Direct fit |
| Lift height | 1 – 2.5 in. |
| Compressed length | 13.97 in. |
| Extended length | 19.25 in. |
| Travel length | 5.28 in. |
Vehicle fitment
It fits these vehicles:
- Ford Explorer, 1995 to 2001 (Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS, XLT)
- Ford Explorer Sport, 1995 to 2001 (Base)
- Ford Explorer Sport Trac, 2001 to 2005 (Adrenalin, Base, XL, XLS, XLT)
- Ford Ranger, 1998 to 2011 (EV, Edge, FX4, STX, Splash, Sport, Tremor, XL, XLT)
- Mazda B2500, 1999 to 2001 (SE, SX, Troy Lee)
- Mazda B3000, 1998 to 2007 (Base, DS, SE, SX, Troy Lee)
- Mazda B4000, 1998 to 2009 (Base, DS, SE, Troy Lee)
Later Explorer generations, Ranger models after 2011, and Mazda B-Series years after those shown are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the current shock’s compressed and extended lengths before ordering. Rancho’s 13.97 in. compressed and 19.25 in. extended figures are the reference points to match against the old unit.
What’s included
One front shock absorber is included. Compare what arrives with your installation plan before starting.












