Overview
The Rancho RS999939 is a 1.5 inch Loaded QuickLIFT front left quick-strut for 2006–2010 Ford Explorer and 2006–2010 Mercury Mountaineer SUVs. It levels the front end and removes the factory nose-down rake, which gives these SUVs a more level stance and room for larger tires.
Each unit is a fully assembled gas charged assembly that combines the strut, coil spring and upper mount. Rancho says tires up to 35 inches can be used depending on application. Nine adjustment positions help tune the ride, and the strut works with the myRIDE Wireless Controller, which adjusts ride quality from the cab as driving conditions change. The controller is not included with the strut.
Key features
- Front left position for listed Explorer and Mountaineer trims
- Gas charged assembly with strut, coil spring and upper mount
- Nine adjustable ride positions
- Compatible with the myRIDE Wireless Controller for in-cab tuning
- Helps fit larger tires, up to 35 inches depending on application
Front geometry and tires
Front geometry is set by the strut, the control arms and the steering knuckle working together. Changing the strut height moves camber and caster, and that can change how the vehicle tracks on the road. A wheel alignment restores those angles, and it should be done with the tires you plan to run, since tire size and load affect the final setting. Without alignment, uneven wear on the inner or outer tread edges is common.
Many SUVs of this age have tired rear shocks or worn bushings. A front lift can make an older rear look low by comparison, and rear shocks that have lost damping can make the front feel bouncy on rough pavement. When the front is opened up, a look at the rear shocks and sway bar links gives a clearer picture of how the vehicle will drive afterward.
- Align the front after the strut is installed
- Check tire rub at full steering lock
- Inspect sway bar end links for play
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999939 |
| Product line | Loaded QuickLIFT (QuickLift Series) |
| Lift height | 1.5 inch |
| Position | Front left |
| Charge type | Gas charged |
| Adjustability | 9 positions |
| Included | Coil spring, upper mount, strut |
| Compatible controller | myRIDE Wireless Controller |
| Larger tire capacity | Up to 35 inches, depending on application |
Vehicle fitment
The manufacturer fitment list covers the following vehicles:
- 2006–2010 Ford Explorer (Eddie Bauer, Limited, XLS, XLT)
- 2006–2010 Mercury Mountaineer (Base, Convenience, Luxury, Premier)
Other Explorer and Mountaineer model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After a front strut replacement, check the wheel alignment, since the height change affects front geometry. The strut arrives assembled, so the swap is a replacement rather than a field build.
What’s included
The assembly includes the strut, coil spring and upper mount.









