Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-021326, is a rear gas-charged monotube shock for Ford Explorer, Explorer Sport and Explorer Sport Trac models, plus the 1997–2001 Mercury Mountaineer in Base trim. Bilstein gives it a 2 in body diameter, a yellow finish, a rear position in the 4600 Series and boots included.
Heat travels from the oil through the monotube wall into the shock body, where it can leave the shock. A dividing piston gives the oil room to expand as it warms, which helps keep foaming and thinning from interfering with damping. The rear position carries a stated lift range of w/0 in. Lift/Drop.
Key features
- Gas-charged monotube design that moves heat from the oil to the outer shock body
- Dividing piston that gives the oil room to expand as temperatures rise
- Seamless tube drawn by a special extrusion method, with tight peak-to-valley tolerance and consistent wall thickness
- Piston head that tunes compression and rebound damping separately for ride comfort
- The design uses fewer parts than most twin tube and road sensing shocks.
- Boots included with the shock
Rear shock ride and handling
A rear shock controls how the back of a sport utility or pickup rebounds after a bump, so its damping shapes stability on washboard roads and off-pavement tracks. With a monotube gas-charged body, damping tends to stay consistent when the shock heats during extended use, which matters on long descents. Rear shocks also carry substantial load when the vehicle is loaded with gear or towing.
When replacing, pairs are generally replaced together so both sides damp evenly. Inspect the bushings, the mount hardware and the upper stud before fitting the new unit, and replace any worn pieces. Rear springs and bump stops are worth checking at the same time. Signs a rear shock is worn include oil on the body, a bouncy rear end after dips, and tire cupping on the rear tread.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-021326 |
| UPC | 651860615073 |
| Series | 4600 Series |
| Position | Rear |
| Body diameter | 2 in |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Lift height | w/0 in. Lift/Drop |
| Fitment type | Direct Fit |
Vehicle fitment
The front-position entries cover the 1995–2001 Ford Explorer in Eddie Bauer, Limited, Postal, XL, XL Fleet, XLS and XLT trims, the 1995–2000 Ford Explorer Sport, the 2001–2005 Ford Explorer Sport Trac in Adrenalin, Base, XL, XLS and XLT trims, and the 1997–2001 Mercury Mountaineer in Base trim.
Front-position applications and years outside these entries are not covered by this rear fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check both mounting points on your old rear shock against this unit before starting, and confirm the hardware you need is on hand. A rear shock carries load and affects ride control, so after installation confirm that the new unit is secure and the boots are fully seated.
What’s included
One rear shock absorber with boots included, in yellow.
Not included: Mounting hardware and other rear suspension parts; check your kit before starting.









