Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Shock Absorber – 915510B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • PRO-X twin tube shock with stem top mount
  • Fits 1974–2002 Ford, Dodge, Isuzu and Suzuki trucks
  • Nitrogen stabilized, gas charged
  • 10-stage velocity sensitive valving
  • Part number 915510B

Description

Overview

The Pro Comp 915510B is a PRO-X twin tube shock absorber with a stem top upper mount and a loop lower mount. It fits 1974–2002 Ford, Dodge, Isuzu, Plymouth and Suzuki trucks and SUVs, including the Ford F-150 and Bronco.

The shock has a 2.0-inch body and a 5.50-inch travel length, and it is nitrogen stabilized with a black powder coat finish. It is designed to damp well on paved roads with occasional off-road use. The extended length is 15.6 to 15.7 inches, and the PRO-X line is offered in extended lengths for lifted trucks.

Key features

  • Stem top upper mount and loop lower mount
  • Nitrogen stabilized, gas charged
  • 10-stage velocity sensitive valving
  • 1-3/8-inch nylon banded piston
  • 5/8-inch chrome hardened shaft
  • Black powder coat finish

Older trucks and fitment checks

Older trucks often show rust, worn bushings and bent brackets, all of which affect how a shock mounts. Before buying a twin tube shock, look over the mounting points and measure them against the shock’s collapsed and extended lengths. Clean the mounting surfaces so the hardware seats properly.

A stem top upper mount and a loop lower mount are common on these trucks, but the hardware may have been changed over the years. Replace worn bushings and cracked rubber at the same time, and check the rear axle and spring perches for damage. Shocks that leak, feel loose or no longer control rebound should be replaced rather than repaired. Keep the old hardware until the new unit is confirmed to fit.

Specifications

Brand Pro Comp Suspension
Part number 915510B
Shock series PRO-X
Extended length 15.6 to 15.7 inches
Collapsed length 9.89 to 10.0 inches
Travel length 5.50 inches
Body diameter 2.0 inches
Upper mount Stem top
Lower mount Loop (eyelet)
Charge Gas, nitrogen stabilized
Valving 10-stage velocity sensitive
Piston 1-3/8-inch nylon banded
Shaft 5/8-inch chrome hardened
Finish Black powder coat
Location Universal

Vehicle fitment

It fits these models: 1975–1993 Dodge Ramcharger; 1980–1996 Ford Bronco, F-250 and F-350; 1984–1990 Ford Bronco II; 1980–2002 Ford F-150; 1997–2002 Ford Expedition and Explorer; 1993–1995 and 1999–2002 Ford F-150 Lightning; 1984–1996 Isuzu Trooper; 1989–1994 Isuzu Amigo; 1991–1996 Isuzu Rodeo; 1974–1981 Plymouth Trailduster; and 1986–1995 Suzuki Samurai.

It does not fit model years after 2002, or Jeep Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Measure the mounting points and the extended and compressed lengths against your vehicle before installing, since the upper mount is a stem top and the lower mount is a loop. The 2.0-inch body and 5.50-inch travel length should be checked the same way.

What’s included

One PRO-X twin tube shock per unit.

Fitment

VehicleYearsTrims
Dodge Ramcharger1975–1993Base, Canyon Sport, Royal SE, SE
Ford Bronco1980–1996Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport
Ford Bronco II1984–1990Base, Eddie Bauer, XL, XL Sport, XLS, XLT, XLT Plus
Ford Expedition1997–2002Eddie Bauer, XLT
Ford Explorer1997–2002Eddie Bauer, Limited, Postal, XL, XL Fleet, XLS, XLT
Ford Explorer Sport1997–2000All
Ford F-1501980–2002Base, Custom, Eddie Bauer, Harley-Davidson Edition, King Ranch, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford F-150 Lightning1993–1995, 1999–2002All
Ford F-2501980–1996Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford F-3501980–1996Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Isuzu Amigo1989–1994S, XS
Isuzu Rodeo1991–1996LS, S, XS
Isuzu Trooper1984–1996Base, DLX, LS, LX, Limited, RS, S, SE, XS
Plymouth Trailduster1974–1981Base
Suzuki Samurai1986–1995Base, JA, JL, JS, JX, JX SE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp 915510B fit a 1993 Ford F-150?

Yes. It fits the 1980–2002 Ford F-150, which includes 1993. It also fits the Ford Bronco, F-250 and F-350 in the years covered for those models.

How does the Pro Comp 915510B mount?

It has a stem top upper mount and a loop lower mount. It measures 15.6 to 15.7 inches extended, with 5.50 inches of travel and a 2.0-inch body.

Is the Pro Comp 915510B made for Jeep Wranglers?

No. It fits older Ford, Dodge, Isuzu, Plymouth and Suzuki models from 1974 to 2002, and no Jeep Wrangler is covered.

Why check mounts on older trucks?

Older frames and brackets can be bent, rusted or worn, which changes where a stem top or loop mount lines up. Measure the mounting points before buying and inspect the bushings at each service.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon