Overview
The Bilstein 4600 Series rear shock absorber, part number 24-021340, is a gas-charged monotube shock for the 1995–2001 Ford Explorer in several trims including Expedition, the 1995–2001 Explorer Sport in Base trim, the 2001–2005 Explorer Sport Trac and the 1997–2000 Mercury Mountaineer in Base trim. It has a 2 in body diameter, a yellow finish and boots included.
Bilstein’s monotube construction routes heat out of the oil and into the outer shock body. A dividing piston absorbs the expansion of the oil as the shock warms, which the company says prevents foaming and viscosity loss. The rear position carries a lift range of w/0 in. Lift/Drop.
Key features
- Monotube gas-charged body that spreads heat from the oil to the shock tube
- Dividing piston that gives oil space to expand as heat builds
- Seamless monotube made with a special extrusion method for tight tolerances
- Independent compression and rebound tuning through the piston head
- It has fewer parts than most twin tube and road sensing designs.
- Boots included and a direct-fit rear position
Daily driving and load
A rear shock works through the full range of travel, from loaded hauling to empty cruising. Because the shock controls rebound, a worn unit can allow the rear to pitch or hop over a rough patch. Watch for fluid residue on the body and for a clunk when the rear wheels hit a dip, since both suggest the shock is wearing out.
Loading the rear changes how much work the shock does, so a unit that feels fine when empty may feel soft under a full bed. Upgrades such as bump stops or heavier-duty springs can change the feel, so review the whole rear end before changing the shock. Check the boots and seals every few months, and retighten fasteners after any major trip.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-021340 |
| UPC | 651860616575 |
| Series | 4600 Series |
| Position | Rear |
| Body diameter | 2 in |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Lift height | w/0 in. Lift/Drop |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 1995–2001 Ford Explorer in Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS and XLT trims, the 1995–2001 Ford Explorer Sport in Base trim, the 2001–2005 Ford Explorer Sport Trac in Adrenalin, Base, XL, XLS and XLT trims, and the 1997–2000 Mercury Mountaineer in Base trim.
Front applications and years outside these entries are not covered by this rear fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounting points on your old rear shock with this unit before removal. A rear shock carries load and affects ride control, so after installation make sure the new unit is secure and the boots are seated before driving.
What’s included
One rear shock absorber with boots included.
Not included: mounting hardware and other rear suspension parts. Check your existing hardware before installing.









