Overview
The Pro Comp PRO-X twin tube shock absorber, part EXP924509B, is a gas charged shock with a 24.9 inch extended length and a 14.8 inch collapsed length. Pro Comp offers it in extended lengths for lifted trucks, and it is intended for vehicles that mostly see pavement with some off-road use.
The shock uses 10 stage velocity sensitive valving that adapts to different road conditions and supports handling. A 5/8 inch chrome hardened piston rod and a Teflon rebound stop are built for a comfortable highway ride and for harder off-road driving. It is a direct fit for the vehicles covered in the fitment section.
Key features
- Gas charged twin tube design with nitrogen stabilization
- 10 stage velocity sensitive valving
- 1-3/8 in nylon banded piston
- 5/8 in chrome hardened shaft
- Teflon rebound stop
- Black powder coat finish
Paved roads with light trail use
A twin tube shock suits drivers who spend most of their time on pavement. Its oil and valving sit in one working cylinder, which is simpler and often less costly than a monotube. The velocity sensitive valving responds to small bumps more gently and firms up on larger ones, which helps highway composure and light trail use.
Care is straightforward. Keep the shock clean, check the boot if one is fitted, and watch for oil on the body or a loss of control on the road. Shocks wear gradually, so a change in ride quality often shows up before any leak does. Replace shocks on the same axle together to keep the ride balanced.
- Check the mounting bushings at every oil change
- Look for oil seepage on the body
- Compare old and new shock lengths before fitting
- Keep the boot clean and undamaged
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP924509B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged |
| Extended length | 24.9 in |
| Collapsed length | 14.8 in |
| Travel length | 10.05 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Mounts | Loop in the feature list, eyelet in the attribute table |
| Position | Universal |
Vehicle fitment
The list covers 1980–1996 Ford Bronco, 1984–1990 Bronco II, 1991–1996 Explorer, 1980–1996 F-150, 1993–1995 F-150 Lightning, 1980–1996 F-250 and F-350, 1980–1983 Jeep CJ5, 1980–1986 CJ7, 1993–1996 Grand Cherokee (ZJ), and 1987–1995 Jeep Wrangler (YJ). Other generations, such as the Wrangler TJ and the Super Duty trucks, are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount types are listed two ways, as loop in the feature list and as eyelet in the attribute table. Check the mounts on your vehicle before ordering. The shock is sold individually, so order one for each position.
What’s included
One PRO-X twin tube shock absorber, part EXP924509B.
Not included: the shock boot, which is sold separately.









