Chevrolet S10 Blazer parts
1983–1994 models · 66 parts in 65 categories
Slickrock 4x4 lists 66 parts that fit the 1983–1994 Chevrolet S10 Blazer, across 65 categories. The biggest sections are ; the most listed brands are Pro Comp Suspension, Rancho and Power Stop. Pick a category below, or select your model year so every listing and product page on the site checks fitment for you.
Popular S10 Blazer parts
-
Lift Kits, Suspension & Shocks, Shock Absorbers, Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 917500B
Lift Kits, Suspension & Shocks, Shock Absorbers, Shock Absorbers & Shock AccessoriesPro Comp PRO-X Twin Tube Shock Absorber – 917500B
- Fits 1983–2004 Chevrolet S10 and Blazer and GMC Jimmy, S15 and Sonoma
- 17.55-inch extended length, 11.05-inch collapsed length
- 6.50-inch travel, 2.0-inch body
- Loop upper and lower mounts
- Twin tube design with 10-stage velocity sensitive valving
SKU: EXP917500B -
Clutch & Bellhousing Components, Clutch Release Bearings, Drivetrain & Differential
Centerforce Throw Out Bearing – N1716
Clutch & Bellhousing Components, Clutch Release Bearings, Drivetrain & DifferentialCenterforce Throw Out Bearing – N1716
- Centerforce N1716 throwout bearing with a flat face
- Designed for racing clutch wear and long service on the street
- Fitment list covers Chevrolet and GMC trucks, SUVs and vans from 1983 to 1995
SKU: CENN1716 -
-
Rack Load Bar
Thule Aero Blade Load Bar – ARB43
- Thule Aero Blade load bar, part ARB43, for roof rack systems
- SmartSlide molded foot system for installation without a tape measure
- SwingBlade end cap pivots open to access the t-slot
- Fitment covers 1983 to 2012 SUVs, crossovers and pickups
SKU: THUARB43 -
Center Console
Tuffy Security Console (Black) – 016-01
- Fits 1978–1996 Ford Bronco
- Fits 1987–1996 Chevrolet Blazer, 1978–1986 Chevrolet K5 Blazer and 1983–1994 Chevrolet S10 Blazer
- 16-gauge steel console in black, 12 1/2 inch wide
- Patented pushbutton latch closes the lid without locking
- Tuffy part number 016-01
SKU: TFY016-01 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999124
- Rancho RS999124 rear RS9000XL shock absorber, listed with 0 in. lift/drop.
- Fitment list covers 1982–2004 Chevrolet, GMC, Cadillac, Dodge, Isuzu and Oldsmobile models.
- 18mm chrome rod, 2.75 in. (70mm) body and 9-position tuning.
- Covered by a limited lifetime warranty.
SKU: RANRS999124 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999123
- Front position; fits 1983 to 2005 Chevrolet, GMC, Isuzu and Oldsmobile trucks and SUVs
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- 9-position tuning, manual or remote
- Protective boot included
SKU: RANRS999123 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55124
- Fits 1982 to 2005 Chevrolet, GMC, Cadillac, Dodge, Isuzu and Oldsmobile vehicles
- Rear position, direct fit, gas charged
- Part number RS55124, UPC 10039703007754
- Lift height w/0 in. Lift/Drop; Limited Lifetime Warranty
- 16mm nitro-carburized rod and 35mm full-displaced bore
SKU: RANRS55124 -
-
Steering Stabilizer
Rancho RS5000 Steering Stabilizer Cylinder – RS5401
- Rancho RS5401 front steering stabilizer cylinder, part RS5401
- Fits many Chevrolet, Dodge, Ford, GMC, Isuzu, Jeep and Toyota trucks and SUVs by year and trim
- Ten-stage velocity sensitive valving and twin tube cellular gas design
- Eyelet ends, bolts to original equipment mounting locations
- Kit includes stud, washers, nuts, cotter pin, sleeve, red boot and zip tie; brackets not included
SKU: RANRS5401 -
Shock Absorbers
Rancho RS5000 Series Shock Absorber – RS5124
- Rancho RS5124 rear gas-charged shock, RS5000 Series
- Fits 1992–2005 Chevrolet Blazer, 1995–2000 Tahoe and 1992–2000 GMC Yukon
- Also fits 1999–2000 Cadillac Escalade and 1992–1999 Suburban models
- Lift rating w/0 in. Lift/Drop
- Ten-stage velocity sensitive valving, red protective boot included
SKU: RANRS5124 -
Disc Brake Pads
Power Stop Z36 Truck And Tow Brake Pads – Z36-154
- Fits 1978–2003 Chevrolet S10, S10 Blazer, Blazer, El Camino and GMC Sonoma, Jimmy and Caballero models
- Front brake pads, direct fit with the stock caliper
- Carbon and ceramic Z36 Truck and Tow formula
- Includes noise insulating shims and hi-temp lubricant
SKU: PSTZ36-154 -
Disc Brake Pads
Power Stop Z26 Extreme Performance Brake Pads – Z26-154
- Front pads for 1982-2003 Chevrolet S10, 1983-1994 S10 Blazer and 1991-2003 GMC Sonoma
- Front position, direct fit with a stock caliper
- Carbon fiber and ceramic hybrid that resists fade to 1500 degrees
- Includes Hi-Temp lubricant and noise insulating shims
SKU: PSTZ26-154 -
-
Oil Filters
K&N Filter Wrench Off Oil Filter – HP-2001
- K&N Filter oil filter, part number HP-2001, canister style
- Fitment list covers Chevrolet and GMC trucks and SUVs across many years
- Includes 1999–2000 Chevrolet Silverado 1500 and 1995–2000 Chevrolet Tahoe
- Anti-drainback valve where applicable; flow 40% higher per K&N
SKU: K/NHP-2001 -
Leaf Spring Helper
Hellwig LP-35 Progressive Load Leveler Helper Spring – 3510
- Hellwig LP-35 progressive load leveler helper spring, part number 3510, 3500 lbs. capacity
- Four leaf stack, recommended for 3/4 and 1 ton applications
- Lists many 1978–2007 Chevrolet, GMC, Dodge and Ford trucks and SUVs
- Mounting hardware is not included; PN 25250 is required
SKU: HEL3510 -
-
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 924509
- Rear ES9000 Series gas charged twin tube shock with loop mounts at both ends
- Fits many Chevrolet, GMC, Ford, Dodge, Jeep, Toyota, Isuzu, Mazda and Mercury trucks and SUVs
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Rated for a 2.5 to 4 in lift
- Shock boots sold separately
SKU: EXP924509 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 914515
- Pro Comp ES9000 front shock, part number 914515, stem upper and loop lower mounts
- Extended 14.71 inch, collapsed 9.56 inch, travel 5.15 inch
- Long fitment list: Chevrolet, GMC, Dodge, Ford, Isuzu, Mazda, Mitsubishi and Toyota trucks from 1981 to 2011
- Rated for 0 in. lift or drop; 10-stage valving, non-adjustable
SKU: EXP914515 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 320500
- Rear shock for 1983–2004 Chevrolet S10, 1995–2005 Chevrolet Blazer and 1998–2003 Nissan Frontier
- Part 320500, ES3000 Series, 20.59 in extended, 12.70 in collapsed, 7.89 in travel
- Loop upper and lower mounts, rated for 0 to 1.5 in. of lift
- Hydraulic, non-adjustable, sold as each
SKU: EXP320500 -
-
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 313515
- Pro Comp ES3000 front shock 313515 for a 0 to 1.5 inch lift
- Extended 13.35 inches, collapsed 9.02 inches, travel 4.33 inches
- Lists 25 vehicle entries from 1970 to 2005, including compact trucks and SUVs
- Stem upper, loop lower mount
SKU: EXP313515 -
Chevrolet S10 Blazer parts by year
Each year opens the full catalog filtered to parts listed for that model year.
Other Chevrolet models All models →
Silverado 15001999–2026 · 1,028 partsSilverado 2500 HD2001–2026 · 859 partsSilverado 3500 HD2007–2026 · 676 partsTahoe1995–2026 · 477 partsBlazer1969–2026 · 329 partsSuburban 15002000–2014 · 283 partsSilverado 2500 HD Classic2007 · 266 partsSilverado 1500 Classic2007 · 263 partsSilverado 35002001–2006 · 245 partsSilverado 25001999–2004 · 242 partsSilverado 1500 HD2001–2006 · 232 partsK101960–1986 · 208 parts