Overview
The Baer Brakes 4301367R brings a red Pro Plus front brake kit built around a 13-inch two-piece slotted, drilled rotor and a six-piston caliper. It fits 78-88 GM G-Body cars, 82-04 GM S10 and S15 pickups and 83-97 S10 and S15 Blazer or Jimmy trucks in 2WD configuration.
Stock-height spindles, billet hubs and bearings come assembled, and the kit adds stainless braided hoses, mounting brackets and hardware. Because the 13-inch design suits wheels of 17 inches and up, measuring the wheel and checking template Q082H should come first.
Key features
- Red six-piston 6P caliper in a fixed design
- Slotted, drilled rotor in two pieces with zinc plating and a billet aluminum hat
- Billet hubs assembled with premium bearings and Redline synthetic grease
- Stainless steel pistons plus noise suppression clips
- Dual seals guarding against dust, weather and pressure
- Powder-coated finish on the caliper
- Billet dust caps included
- Built in Phoenix, Arizona, from forged or billet aluminum
Wheel and tire considerations
Tire diameter and wheel offset change how the caliper sits in the wheel opening, so the template check should cover the tire you plan to run as well as the wheel. A taller tire or a wheel with less clearance around the caliper body can rub at full steering lock, which is worth checking before the first drive.
Front suspension work often happens alongside brake service. Ball joints, tie rod ends and wheel bearings all affect how the rotor runs against the pads. Inspect them while the assembly is off the vehicle, and replace worn parts before setting the new brakes.
- Check steering lock with the wheel fitted and the tire inflated
- Inspect ball joints and tie rod ends during installation
- Replace brake line fittings that show cracking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301367R |
| UPC | 844165040101 |
| Caliper | 6-piston (6P), fixed, red |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Zinc plated |
| Pad type | FMSI D0731 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5 x 4.75 inch |
| Wheel stud size | M12-1.50 x 51.5mm |
| Brake hose | Steel braided, DOT approved |
| Spindles | Stock height, included |
| Axle / drive | Front / 2WD |
| Template | Q082H |
| Country of origin | US |
Vehicle fitment
It fits the 1978-1988 Buick Regal, 1978-1987 Chevrolet El Camino, 1978-1983 Chevrolet Malibu, 1978-1988 Chevrolet Monte Carlo, 1982-2003 Chevrolet S10, 1983-1994 S10 Blazer, 1982-1990 GMC S15, 1983-1991 S15 Jimmy, 1978-1981 and 1985-1988 Oldsmobile Cutlass, 1978-1988 Oldsmobile Cutlass Supreme and 1978-1988 Pontiac Grand Prix.
Four-wheel-drive models and years outside the listed ranges are not part of the 2WD application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The assembly arrives ready to mount, so installation centers on attaching it to the control arms and connecting the braided hoses. Verify wheel clearance against template Q082H first, then check pedal feel at low speed before normal driving.
What’s included
Included: the 13-inch two-piece rotor assembly, the red six-piston caliper, billet hubs with bearings, stock-height spindles, stainless braided hoses, mounting brackets and hardware.
Not included: Lug nuts.














