Overview
The Baer Brakes 4301368S is a silver Pro Plus front brake system for 1978–1988 G-body cars and 1982–2003 Chevrolet S10 pickups, plus 1982–1990 GMC S15 pickups on two-wheel-drive trucks. It comes preassembled on modified stock height spindles and uses a 14 inch two-piece rotor with a six-piston caliper.
Billet aluminum hubs come with premium bearings packed in Redline synthetic grease, and mounting brackets, stainless braided hoses and hardware are included. The kit uses D0731 pads and is designed for wheels 18 inches or larger.
Key features
- Six-piston caliper with staggered pistons to help even pad wear
- Two-piece slotted, drilled and zinc plated rotor with aluminum hat
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- Billet aluminum hubs with bearings and billet dust caps
- CNC machined forged or billet aluminum with powder coated finish
- Steel braided hoses, DOT approved
Stock height and alignment
Stock height spindles keep the front geometry close to the original factory setup, which makes the brake kit easier to fit into an existing suspension. Even so, any change at the steering knuckle or hub position can shift caster, camber and toe, so an alignment after installation is a normal step.
Hub bearings and wheel studs should be checked during the first few service intervals. Preload and lug torque can settle as the new hardware seats, and a loose wheel or a warm hub is a sign to stop and inspect before driving further.
- Schedule an alignment after installation
- Re-check lug torque after the first drive
- Feel the hub for heat after a long stop
- Inspect the stud threads for damage
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301368S |
| UPC | 844165040187 |
| Caliper color | Silver |
| Caliper | 6-piston fixed (6P) |
| Rotor diameter | 14 inch |
| Rotor thickness | 1.15 |
| Rotor construction | 2-piece slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI | D0731 |
| Template | Q082P |
| Wheel bolt pattern | 5×4.75 inch |
| Lug count | 5 |
| Wheel stud size | M12-1.50 x 51.5mm |
| Minimum wheel diameter | 18 inch |
| Hose material | Steel braided |
| Spindles included | Yes, stock height |
| Grade | Performance |
| Emission code | 6 |
Vehicle fitment
Manufacturer fitment covers 1978–1988 Buick Regal, 1978–1987 Chevrolet El Camino, 1978–1983 Chevrolet Malibu, 1978–1988 Chevrolet Monte Carlo, 1982–2003 Chevrolet S10, 1983–1994 Chevrolet S10 Blazer, 1982–1990 GMC S15, 1983–1991 GMC S15 Jimmy, 1978–1981 and 1985–1988 Oldsmobile Cutlass, 1978–1988 Oldsmobile Cutlass Supreme and 1978–1988 Pontiac Grand Prix.
Not on the list: full-size C/K trucks, Camaro and Firebird models, and any year outside the ranges above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spindles arrive preassembled, so the hub side is not a separate step. Check wheel clearance with template Q082P before mounting, since Baer cannot guarantee fit with every wheel style.
What’s included
Front rotors pre-assembled with stainless hardware, billet aluminum hubs with bearings, stock height spindles, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts.














