Overview
The Baer Brakes 4301107S is an Extreme Plus front brake system with silver calipers, designed for 1978–1988 GM G-Body cars and 1982–2003 Chevrolet S10 pickups, along with other GM models listed in the fitment section.
The system pairs a 1-piece monoblock 6-piston, 6S caliper with a 14 inch two-piece slotted, drilled, zinc-plated rotor on a billet aluminum hat, and uses FMSI D1247 pads. The billet aluminum hubs come with bearings packed in Redline synthetic grease, billet dust caps, and stock-height spindles already attached.
Key features
- 1-piece monoblock 6-piston 6S caliper in silver, built in Phoenix, Az
- CNC machined from 2618 aluminum forgings
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Rotors pre-assembled with NAS high grade stainless hardware
- Stainless braided hoses and all mounting brackets included
Spindle and hub swap basics
Swapping a complete front spindle assembly affects more than the brakes. Steering geometry, wheel alignment and the axle connection all change when the spindle changes, so an alignment check after the swap is a sensible step. Ball joints, tie rod ends and wheel bearings should be inspected while the front end is apart.
Brake hoses need attention during the swap. Check that the stainless braided hoses clear the suspension through full steering lock and full compression. Bleed the system completely after the hoses are connected, and test the pedal before driving on public roads.
- Inspect ball joints and tie rod ends
- Check hose routing at full steering lock
- Bleed the brakes completely after reconnecting
- Schedule an alignment after the spindle swap
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301107S |
| UPC | 844165036494 |
| Sold as | Kit |
| Caliper | 1-piece monoblock, 6-piston (6S), fixed, silver |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor hat | Billet aluminum |
| Brake pad FMSI number | D1247 |
| Hose material | Stainless steel |
| Spindles | Included, stock height |
| Drive | 2WD |
| Lug count | 5 |
| Wheel bolt pattern | 5×4.75 |
| Wheel stud size | M12-1.50 x 51.5mm |
| Minimum wheel diameter | 18.0 inch |
| Lug nuts included | No |
| Grade | Performance |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
Baer’s manufacturer list covers the following: 1978–1988 Buick Regal; 1978–1987 Chevrolet El Camino; 1978–1983 Chevrolet Malibu; 1978–1988 Chevrolet Monte Carlo; 1982–2003 Chevrolet S10; 1983–1994 Chevrolet S10 Blazer; 1982–1990 GMC S15; 1983–1991 GMC S15 Jimmy; 1978–1981 and 1985–1988 Oldsmobile Cutlass; 1978–1988 Oldsmobile Cutlass Supreme; and 1978–1988 Pontiac Grand Prix.
Models and years outside these listed ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes stock-height spindles with the hubs, so plan on a full front spindle and hub swap. Lug nuts are not included, so supply a set that suits the 5×4.75 bolt pattern.
The 14 inch Extreme Plus is designed for wheels 18 inch or larger, with a minimum wheel diameter of 18.0 inch. Check wheel clearance with template N085P before mounting. Spindle and brake work calls for an experienced installer.
What’s included
The kit includes the 6S monoblock calipers, two-piece rotors assembled with stainless hardware, billet aluminum hubs with bearings, stock-height spindles, mounting brackets, stainless braided hoses, and hardware.
Not included: Lug nuts.














