Overview
Baer’s S4 kit in red, part number 4301438R, is a front disc brake system with a red four-piston S4 caliper and an 11 inch two-piece rotor. It arrives on stock-height spindles with the hubs already built up. It is made for GM G-Body cars from 1978 to 1988 and S10 and S15 pickups from 1982 to 2004, along with 2WD S10 and S15 Blazer and Jimmy models.
The 11 inch SS4 Plus is a compact version of larger systems, made for wheels 15 inch or larger. The rotors are pre-assembled with stainless hardware, and the billet hubs carry bearings already packed with grease.
Key features
- Red powder coated S4 four-piston caliper, its pistons hard anodized aluminum
- Stainless steel abutments and noise suppression clips
- Dual seal arrangement guards against dust, weather and pressure
- Two-piece slotted, drilled and zinc plated rotor with an aluminum hat
- Stainless steel hardware pre-assembled into the rotors
- Billet aluminum hubs with bearings and billet dust caps
- Braided steel hoses, DOT approved
- DR1 pad type, with HB100 also accepted
Brake bleeding and hose care
Any time a brake hose is connected or a caliper is changed, the hydraulic system needs to be bled to remove air. Air in the lines makes the pedal feel spongy and reduces stopping power. Bleed the lines in a sequence that suits the vehicle, and keep the fluid level topped up as it drops during the process.
Braided steel hoses hold up well, but they still need inspection. Look for kinks, chafing against brackets, and fittings that weep fluid. Brake fluid absorbs moisture over time, so periodic fluid replacement keeps the system working as intended. Keep the reservoir cap sealed to limit moisture entering the system.
- Bleed the system after any hose or caliper change
- Inspect braided hoses for chafing and kinks
- Replace brake fluid on a regular service schedule
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301438R |
| UPC | 844165030683 |
| Caliper | S4, four-piston, fixed, red |
| Rotor | 11.0 inch, two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 inch |
| Pad type (FMSI) | DR1 |
| Axle and drive | Front, 2WD |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5 lug, 5 x 4.75 inch |
| Wheel stud size | M12-1.50 x 51.5mm |
| Spindles included | Yes, stock height |
| Template | S125A |
| Brake hose | Steel braided, DOT approved |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits 1978-1988 Buick Regal; 1978-1987 Chevrolet El Camino; 1978-1983 Chevrolet Malibu; 1978-1988 Chevrolet Monte Carlo; 1982-2003 Chevrolet S10; 1983-1994 Chevrolet S10 Blazer; 1982-1990 GMC S15; 1983-1991 GMC S15 Jimmy; 1978-1981 and 1985-1988 Oldsmobile Cutlass; 1978-1988 Oldsmobile Cutlass Supreme; and 1978-1988 Pontiac Grand Prix.
Earlier G-body cars before 1978 are not included, and four-wheel-drive trucks are outside this kit’s 2WD fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs, spindles and rotors arrive matched, so the job is mainly mounting the unit and connecting the braided hoses. Lug nuts are not in the box. The studs are M12-1.50 x 51.5mm on a 5 x 4.75 inch pattern. Use jack stands during the work, and bleed the brakes after the hoses are connected, as any hydraulic brake job requires.
What’s included
Red S4 calipers, two-piece rotors with pre-assembled hardware, billet hubs with bearings and dust caps, stock-height spindles, mounting brackets, braided hoses and hardware.
Not included: Lug nuts.














