Overview
The Baer Brakes 4301368R is a red Pro Plus front disc brake system for 1978–1988 G-body cars and 1982–2003 Chevrolet S10 pickups, plus 1982–1990 GMC S15 pickups. Its 14 inch rotor and six-piston caliper arrive on modified stock height spindles, which suits owners who plan to stay with stock height.
Rotors are pre-assembled with stainless hardware, and the billet hubs come with premium bearings packed in Redline synthetic grease. Stainless braided hoses and all mounting brackets are part of the package.
Key features
- Six-piston fixed caliper with staggered pistons that help reduce uneven pad wear
- Two-piece slotted, drilled and zinc plated rotor with billet aluminum hat
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals protecting against dust, weather and pressure
- Billet aluminum hubs with premium bearings and billet dust caps
- Powder coated finish on CNC machined forged or billet aluminum parts
- DOT approved steel braided hoses
Before you buy
Upgrading front disc brakes on these rear-wheel-drive GM vehicles changes more than stopping power. A larger rotor and multi-piston caliper absorb more heat during repeated stops, and the pads and rotors are matched to the caliper, so they are usually replaced as a set. Before buying, compare wheel clearance, master cylinder capacity and brake line routing with your current setup. Wheels with deep dish faces or limited backspacing are the most common reason a brake kit fails to clear.
Stock height spindles keep suspension geometry close to the factory setup, which matters on a lifted or lowered truck. If the vehicle has been lifted, recheck the brake hoses and caliper position after alignment. Inspect the old rotors for scoring, cracks and thickness loss before reuse, and replace worn wheel bearings while the hubs are open.
- Check wheel backspacing and clearance before mounting tires
- Inspect brake lines and hoses for chafing after installation
- Bed in new pads gradually before heavy use
- Re-torque lug nuts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301368R |
| UPC | 844165040163 |
| Caliper color | Red |
| Caliper | 6-piston fixed (6P) |
| Rotor diameter | 14 inch |
| Rotor thickness | 1.15 |
| Rotor construction | 2-piece slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI | D0731 |
| Template | Q082P |
| Wheel bolt pattern | 5×4.75 inch |
| Lug count | 5 |
| Wheel stud size | M12-1.50 x 51.5mm |
| Minimum wheel diameter | 18 inch |
| Hose material | Steel braided |
| Spindles included | Yes, stock height |
| Grade | Performance |
| Emission code | 6 |
Vehicle fitment
It fits 1978–1988 Buick Regal, 1978–1987 Chevrolet El Camino, 1978–1983 Chevrolet Malibu, 1978–1988 Chevrolet Monte Carlo, 1982–2003 Chevrolet S10, 1983–1994 Chevrolet S10 Blazer, 1982–1990 GMC S15, 1983–1991 GMC S15 Jimmy, 1978–1981 and 1985–1988 Oldsmobile Cutlass, 1978–1988 Oldsmobile Cutlass Supreme and 1978–1988 Pontiac Grand Prix. It does not cover full-size trucks, Camaro and Firebird models, or years beyond the ranges shown. Confirm fit for your vehicle’s year, model and trim before ordering.
Not covered: full-size trucks, Camaro and Firebird models, and years beyond the ranges shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spindles come assembled, so the hub assembly is already done. Clearance depends on the wheel style, so use template Q082P to compare it against the wheel you plan to fit.
What’s included
Front rotors with stainless hardware, billet hubs with bearings, stock height spindles, mounting brackets, braided hoses and hardware.
Not included: lug nuts.














