Overview
The Baer Brakes Track4 front brake system, part number 4301406S, is a silver front kit that arrives assembled on stock height spindles for GM G-Body cars, S10 and S15 pickups, and Blazer or Jimmy models. It uses a 4-piston T4 caliper on a 13.0 inch one-piece slotted, drilled rotor.
The billet aluminum hubs come assembled with bearings, packed with Redline synthetic grease and fitted with billet dust caps. Mounting brackets, stainless braided hoses and hardware are included. The 13 inch Track4 is designed for most 17 inch or larger wheels, but fit with every wheel style is not assured, so verify clearance with the Q082H template before ordering. The kit uses the D0749 pad type.
Key features
- 4-piston T4 caliper in silver with a powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure, with T-compliant dust and weather seals
- One-piece slotted, drilled, zinc-plated rotor
- Billet aluminum hubs with billet dust caps and premium bearings
Before you buy
A front brake upgrade affects more than the rotor. The caliper, pads, hubs and hoses work as one system, so matching the pieces matters as much as the size. Wheel clearance is the first check: a larger rotor and caliper take up more room behind the spokes, so confirm the wheel diameter and offset against the caliper before committing.
Older GM trucks and coupes often have worn steering and suspension parts, and loose components make brake fit harder to judge. Inspect ball joints, wheel bearings and tie rod ends before fitting a kit like this, and replace anything worn so the new hubs and rotor run true.
- Confirm the rotor clears the wheel at full steering lock
- Check that the brake pedal feels firm before and after the install
- Replace brake fluid whenever the hydraulic system is opened
- Bed in new pads and rotors gradually
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301406S |
| UPC | 844165042037 |
| Sold as | Kit |
| Axle | Front |
| Drive | 2WD |
| Caliper | T4, 4-piston, fixed, silver |
| Brake pad FMSI number | D0749 |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 1-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×4.75 |
| Lug count | 5 lug |
| Wheel stud size | M12-1.50 x 51.5mm |
| Minimum wheel diameter | 17.0 inch |
| Brake hose | Steel braided, DOT approved |
| Spindles | Stock height, included |
| Grade | Performance |
| Fitment template | Q082H |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list for this kit covers the following models:
- Buick Regal, 1978–1988
- Chevrolet El Camino, 1978–1987
- Chevrolet Malibu, 1978–1983
- Chevrolet Monte Carlo, 1978–1988
- Chevrolet S10, 1982–2003
- Chevrolet S10 Blazer, 1983–1994
- GMC S15, 1982–1990
- GMC S15 Jimmy, 1983–1991
- Oldsmobile Cutlass, 1978–1981 and 1985–1988
- Oldsmobile Cutlass Supreme, 1978–1988
- Pontiac Grand Prix, 1978–1988
Makes, models and years not shown above are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs come assembled on stock height spindles, so no bearing packing or hub build is needed. Mounting brackets, stainless braided hoses and hardware are included for the install. Check the Q082H template and the 17.0 inch minimum wheel diameter against the wheels you plan to run. Brake components are safety-critical, so a qualified technician should install the kit and test it before driving.
What’s included
The Track4 front brake system with assembled billet aluminum hubs, mounting brackets, stainless braided hoses, hardware and front rotor. Lug nuts are not included.
Not included: Lug nuts.














