Overview
The Baer Brakes 4301367B is a black Pro Plus front brake system with a 13-inch slotted and drilled two-piece rotor and a six-piston caliper. Its applications are 78-88 GM G-Body cars, 82-04 S10/S15 pickups and 83-97 S10/S15 Blazer and Jimmy trucks, all 2WD.
All hubs, bearings and spindles come pre-assembled at stock height. Baer includes mounting brackets, stainless braided hoses and hardware. The 13-inch version is intended for wheels 17 inches or larger, so compare your wheel with template Q082H before mounting.
Key features
- Black six-piston 6P caliper with a fixed mounting design
- Two-piece slotted, drilled rotor, zinc plated, with a billet aluminum hat
- Premium bearings in billet aluminum hubs, packed with Redline synthetic grease
- Stainless steel pistons, abutments and noise suppression clips
- Staggered piston arrangement that reduces uneven pad wear
- Dual seals rated for dust, weather and pressure
- Billet dust caps included
- DOT approved steel braided hoses
Trail use and heat management
Off-road driving puts more heat and debris into the front brakes than street use. Mud and sand load the caliper slides and the dust caps, so clean the caliper area after deep wading or trail runs and look for grease that has been pushed out of the hubs.
Brake fade appears when the pads and rotor overheat during long descents. Using engine braking on steep grades and letting the brakes cool between hard stops reduces the chance of fade. Standard pads have limits, so a pad rated for higher temperatures is a common upgrade for heavy use.
- Rinse mud from the caliper and hub area after trail use
- Check dust caps for cracks or missing seals
- Use engine braking on long downhill sections
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301367B |
| UPC | 844165040088 |
| Caliper | 6-piston (6P), fixed, black |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Zinc plated |
| Pad type | FMSI D0731 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5 x 4.75 inch |
| Wheel stud size | M12-1.50 x 51.5mm |
| Brake hose | Steel braided, DOT approved |
| Spindles | Stock height, included |
| Axle / drive | Front / 2WD |
| Template | Q082H |
| Country of origin | US |
Vehicle fitment
It fits the 1978-1988 Pontiac Grand Prix, 1978-1988 Oldsmobile Cutlass Supreme, 1978-1981 and 1985-1988 Oldsmobile Cutlass, 1978-1988 Chevrolet Monte Carlo, 1978-1987 Chevrolet El Camino, 1978-1983 Chevrolet Malibu, 1978-1988 Buick Regal, 1982-2003 Chevrolet S10, 1983-1994 Chevrolet S10 Blazer, 1982-1990 GMC S15 and 1983-1991 GMC S15 Jimmy.
Four-wheel-drive S10 and S15 trucks are not part of the 2WD application, and years outside the ranges above are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hub assembly and bearings arrive preinstalled, so the work is bolting the unit to the control arms and attaching the braided hoses. Confirm wheel clearance with the Q082H template before mounting. Give the brakes a low-speed test before normal driving.
What’s included
Supplied: the front rotor, the six-piston black caliper, billet hubs with bearings, stock-height spindles, stainless braided hoses, mounting brackets and hardware.
Not included: Lug nuts.














