Overview
The Baer Brakes Extreme Plus front brake system, part number 4301107B, is a 14-inch, two-piece front disc brake kit built around a 1-piece monoblock 6-piston 6S caliper. It is made for 1978–1988 GM G-body cars and for 1982–2003 Chevrolet S10 and GMC S15 pickups, plus the S10 Blazer and S15 Jimmy, in the 2WD applications this kit covers.
The billet aluminum hubs and modified stock-height spindles arrive already assembled, so the kit is a complete front end rather than loose components. Wheel designs vary widely, so compare the N085P template with the wheel you intend to use before mounting. The rotor is intended for wheels 18 inches or larger, with a minimum wheel diameter of 18.0 inch.
Key features
- 1-piece monoblock, 6-piston 6S caliper manufactured in Phoenix, Arizona
- CNC machined from US-sourced 2618 aluminum forging with a powder-coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals guard against dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Billet hubs with premium bearings packed with Redline synthetic grease and billet dust caps
- Stainless braided hoses, mounting brackets and hardware are included
Choosing the right setup
A front disc kit replaces the caliper, rotor and pad set together, so the hub, spindle and steering geometry all need to suit the vehicle they go on. Stock-height spindles keep the assembly close to original ride height, which suits vehicles driven mostly on pavement and light gravel.
Wheel clearance deserves the most attention. Check the inner rim against the caliper body and the outer rim against the fender and tire width before the first drive. A rotor of this size often leaves less room behind the spokes, so the minimum wheel diameter is a starting point rather than a guarantee of clearance.
- Measure backspacing before buying wheels
- Recheck lug nut torque after the first few drives
- Inspect brake lines and braided hoses at each pad change
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301107B |
| UPC | 844165036401 |
| Sold as | Kit |
| Axle | Front |
| Drive | 2WD |
| Caliper | 6S 1-piece monoblock, 6 pistons, fixed |
| Caliper color | Black |
| Pad type (FMSI) | D1247 |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Hose material | Stainless steel |
| Grade type | Performance |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.75 |
| Wheel stud size | M12-1.50 x 51.5mm |
| Minimum wheel diameter | 18.0 inch |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
It fits 1978–1988 Buick Regal, 1978–1987 Chevrolet El Camino, 1978–1983 Chevrolet Malibu, 1978–1988 Chevrolet Monte Carlo, 1982–2003 Chevrolet S10, 1983–1994 Chevrolet S10 Blazer, 1982–1990 GMC S15, 1983–1991 GMC S15 Jimmy, 1978–1981 and 1985–1988 Oldsmobile Cutlass, 1978–1988 Oldsmobile Cutlass Supreme and 1978–1988 Pontiac Grand Prix. Later S10 Blazer and S15 Jimmy years, the Chevrolet Camaro and the Pontiac Firebird are not covered. Confirm your vehicle’s year, model and trim before ordering.
Model years and models outside that list are not covered, including later S10 Blazer and S15 Jimmy years, the Chevrolet Camaro and the Pontiac Firebird. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs and spindles arrive preassembled, so check the fit of the assembled unit before mounting. Compare the N085P template with the wheel first, because fit cannot be guaranteed for every wheel style. Brake work calls for a qualified installer and a proper bleed after the lines are connected.
What’s included
- Monoblock 6-piston 6S front caliper
- 2-piece slotted, drilled, zinc-plated front rotor with billet aluminum hat, preassembled with stainless hardware
- Billet aluminum hubs with premium bearings and billet dust caps
- Modified stock-height spindles
- Mounting brackets, stainless braided hoses and hardware
Not included: Lug nuts.














