Overview
The Baer Brakes 4301107R is a front Extreme Plus brake system for 2WD GM G-Body cars, S10 and S15 pickups, and S10 Blazer and Jimmy models. It pairs a 1-piece, 6-piston, 6S monoblock caliper with a 14-inch two-piece slotted, drilled rotor and arrives on modified stock-height spindles, so the front end is ready to bolt in as one assembly.
This system is designed for the vehicles in the fitment section below. The 14-inch rotor suits wheels 18 inches or larger, and the kit uses D1247 pads. Fit with every wheel style is not guaranteed, so compare the template with your wheel before mounting.
Key features
- 1-piece monoblock, 6-piston, 6S caliper, powder coated, manufactured in Phoenix, Arizona
- CNC machined from U.S. sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Billet aluminum hubs with premium bearings packed with Redline synthetic grease and billet dust caps
Choosing a wheel for big brakes
Clearance decides whether a larger brake system works with a given wheel. The caliper body and rotor hat both take up space behind the spokes, so the wheel’s inner face and spoke design matter as much as its diameter. Wheels with open centers and deeper dish usually give the most room, while solid-face designs need careful measuring.
Tire sidewall height and width also change how much room the wheel has to clear the caliper. A taller or wider tire can reduce clearance on the inside of the wheel, so check the setup with the tire you plan to run. Template N085P gives a physical check before any wheel is ordered or mounted.
- Measure inner wheel clearance over the caliper
- Check tire width against the spoke gap
- Confirm the lug seat type matches the studs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301107R |
| UPC | 844165036456 |
| Axle | Front |
| Drive | 2WD |
| Caliper | 6S, 1-piece monoblock, 6 pistons, fixed type |
| Caliper color | Red |
| Caliper piston material | Stainless steel |
| Caliper material | CNC machined 2618 aluminum forging |
| Pad type (FMSI) | D1247 |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel, braided |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.75 in |
| Wheel stud size | M12-1.50 x 51.5mm |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
It fits 1978–1988 Buick Regal; 1978–1987 Chevrolet El Camino; 1978–1983 Chevrolet Malibu; 1978–1988 Chevrolet Monte Carlo; 1982–2003 Chevrolet S10; 1983–1994 Chevrolet S10 Blazer; 1982–1990 GMC S15; 1983–1991 GMC S15 Jimmy; 1978–1981 and 1985–1988 Oldsmobile Cutlass; 1978–1988 Oldsmobile Cutlass Supreme; and 1978–1988 Pontiac Grand Prix. Full-size GM trucks and Blazer years outside 1983–1994 fall outside the covered range. Verify your vehicle’s year, model and trim before you install.
The list does not cover full-size GM trucks, Blazer models outside 1983–1994, or S10 and S15 models after the years shown. Verify your vehicle’s year, model and trim against the list above before you install.
Installation notes
Lug nuts are not included, so have five lug nuts that match the 5×4.75 bolt pattern and M12-1.50 studs ready. Use the N085P template to check clearance against the wheel you plan to run before the system is mounted. Mounting brackets, stainless braided hoses and hardware come with the kit. Brake work affects stopping distance, so have the completed installation checked before the vehicle returns to public roads.
What’s included
The kit includes the 6-piston 6S monoblock caliper, the two-piece slotted, drilled rotor with billet aluminum hat, the billet aluminum hubs with premium bearings and billet dust caps, modified stock-height spindles, mounting brackets, stainless braided hoses and the NAS high grade stainless hardware used to assemble the rotors.
Not included: Lug nuts.














