Overview
The Baer Brakes S4 front brake kit, part 4301438B, puts a black four-piston S4 caliper on an 11 inch two-piece rotor. The hubs and spindles come preassembled at stock height, so the front end installs as a package. Covered vehicles are GM G-Body cars from 1978 to 1988, S10 and S15 pickups from 1982 to 2004, and 2WD S10 and S15 Blazer and Jimmy models.
The SS4 Plus is a smaller version of Baer’s larger systems, built for 15 inch wheels and up. Each rotor arrives with stainless hardware pre-installed. The kit is for two-wheel-drive applications only.
Key features
- Black powder coated S4 four-piston caliper, machined from forged or billet aluminum
- Hard anodized pistons, stainless steel abutments and noise suppression clips
- Dual seals against dust, weather and pressure
- Two-piece slotted, drilled and zinc plated iron rotor with aluminum hat
- Pre-assembled NAS high grade stainless hardware on the rotors
- Billet aluminum hubs with premium bearings, billet dust caps and stock-height spindles
- Stainless braided steel hoses, DOT approved
- FMSI DR1 pads, with HB100 pad type also accepted
Caring for hubs and rotors
Billet hubs with sealed bearings need regular attention to stay quiet and free of play. Packing grease is installed at assembly, but the seals should still be checked at each brake service for cracks or leaks. Keep dust caps in place, since they keep water and road grit away from the bearing.
Two-piece rotors have an aluminum hat joined to an iron braking ring, and the two parts expand at different rates under heat. Avoid hard stops from speed with cold brakes, and let the system cool after strenuous use. Check the hardware that holds the rotor together at every service.
- Check hub seals for cracks or grease leaks
- Keep dust caps installed to protect the bearings
- Inspect rotor hat hardware at every service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301438B |
| UPC | 844165030652 |
| Caliper | S4, four-piston, fixed, black |
| Rotor | 11.0 inch, two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 inch |
| Pad type (FMSI) | DR1 |
| Axle and drive | Front, 2WD |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5 lug, 5 x 4.75 inch |
| Wheel stud size | M12-1.50 x 51.5mm |
| Spindles included | Yes, stock height |
| Template | S125A |
| Brake hose | Steel braided, DOT approved |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Covered vehicles: 1978-1988 Buick Regal; 1978-1987 Chevrolet El Camino; 1978-1983 Chevrolet Malibu; 1978-1988 Chevrolet Monte Carlo; 1982-2003 Chevrolet S10; 1983-1994 Chevrolet S10 Blazer; 1982-1990 GMC S15; 1983-1991 GMC S15 Jimmy; 1978-1981 and 1985-1988 Oldsmobile Cutlass; 1978-1988 Oldsmobile Cutlass Supreme; and 1978-1988 Pontiac Grand Prix.
The covered years begin in 1978, so earlier G-body cars are outside the kit. Four-wheel-drive versions of these trucks are not part of the 2WD design. Match your year, model and trim to the covered vehicles before ordering.
Installation notes
The hubs and spindles are already assembled, so the work is installing the unit and connecting the hoses. Lug nuts are not supplied. Because the bolt pattern is 5 x 4.75 inch with M12-1.50 studs, use lug nuts sized to that thread. Support the vehicle on stands, and check hose routing before the brakes are used.
What’s included
Black S4 calipers, two-piece rotors, billet hubs with bearings and dust caps, stock-height spindles, mounting brackets, stainless braided hoses and hardware.
Not included: Lug nuts.














