Overview
The Baer Brakes Track4 front brake system, part number 4301406B, is a 13-inch disc brake kit with a four-piston T4 caliper for 2WD GM G-Body cars and S10 and S15 pickups, including Blazer and Jimmy models. Baer assembles the Track4 on stock-height spindles, so the hubs, bearings, rotor, caliper and mounting brackets arrive as one front-end package.
The kit suits owners who want a complete front disc brake upgrade without assembling separate parts. The listed fitment covers the 1978–1988 G-Body platform, including the Buick Regal, Chevrolet El Camino, Malibu and Monte Carlo, Oldsmobile Cutlass and Pontiac Grand Prix, along with early-1980s through early-1990s S10 and S15 pickups and Blazer and Jimmy SUVs. The system is designed to fit most wheels 17 inches or larger.
Key features
- Two-piece, four-piston T4 caliper manufactured in Phoenix, Arizona
- Caliper body CNC machined from forged or billet aluminum with a powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals guard against dust, weather and pressure
- One-piece slotted, drilled and zinc-plated rotor
- Billet aluminum hubs with premium bearings packed with Redline synthetic grease, plus billet dust caps
- Stainless steel braided hoses, DOT approved
Before you buy
Swapping an old G-Body or S10 front end for disc brakes changes more than the stopping hardware. The hubs, bearings and rotor all carry load through the steering knuckle, so any play or noise should be checked before the new assembly goes on. Brake fluid and the rubber hard lines also deserve a look, because older lines can crack near the frame bracket and interfere with the new hose routing.
Wheel clearance is worth a second look too. A larger rotor and caliper can change how a wheel sits against the brake body, so test fit the wheel and tire before the vehicle leaves the stands. Wheel offset and backspacing affect this more than diameter alone.
- Inspect steering linkage for wear before mounting
- Replace old brake fluid after the first bleed
- Re-check lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301406B |
| UPC | 844165042013 |
| Drive | 2WD |
| Axle | Front |
| Caliper | T4, four-piston, fixed, black |
| Caliper finish | Powder coated |
| Rotor outside diameter | 13.0 inch |
| Rotor construction | One-piece, vented, slotted and drilled |
| Rotor material | Iron, zinc plated |
| Brake pad FMSI number | D0749 |
| Wheel bolt pattern | 5 x 4.75 inch |
| Lug count | 5 |
| Wheel stud size | M12-1.50 x 51.5 mm |
| Minimum wheel diameter | 17.0 inch |
| Brake hose | Steel braided, DOT approved |
| Hubs | Billet aluminum with premium bearings |
| Spindles | Stock height, included |
| Lug nuts included | No |
| Template | Q082H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list for this kit covers these 2WD vehicles: 1978–1988 Buick Regal; 1978–1987 Chevrolet El Camino; 1978–1983 Chevrolet Malibu; 1978–1988 Chevrolet Monte Carlo; 1982–2003 Chevrolet S10; 1983–1994 Chevrolet S10 Blazer; 1982–1990 GMC S15; 1983–1991 GMC S15 Jimmy; 1978–1981 and 1985–1988 Oldsmobile Cutlass; 1978–1988 Oldsmobile Cutlass Supreme; and 1978–1988 Pontiac Grand Prix.
Four-wheel-drive versions are not covered. The Malibu list stops at 1983, so 1984 and later Malibus are excluded, the Cutlass list skips 1982 through 1984, and S15 Jimmy and S10 Blazer years after the listed ranges are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The assembly arrives on stock-height spindles, so the front hubs and spindles are already set up. Lug nuts are not included, so you will need five lug nuts that suit the 5 x 4.75 inch pattern. Not every wheel style is guaranteed to fit, so check your 17-inch or larger wheel against the Q082H template before mounting. Brake work should be done by someone experienced with disc brake service.
What’s included
The kit includes the front rotor, the T4 caliper, billet aluminum hubs with bearings and billet dust caps, mounting brackets, stainless braided hoses and the included hardware.
Not included: lug nuts.














