Overview
The Baer Brakes 4301367S is a silver Pro Plus front brake system with a 13-inch two-piece slotted and drilled rotor and a six-piston caliper. It is a complete front kit for 78-88 GM G-Body cars, S10 and S15 pickups (82-04) and S10 and S15 Blazer or Jimmy models (83-97), all in 2WD form.
The hubs, bearings and stock-height spindles arrive pre-assembled, so the main job is bolting the unit to the control arms. The 13-inch Pro Plus is designed for wheels of 17 inches or larger, and template Q082H is the tool for checking clearance against the wheel you plan to run.
Key features
- Silver six-piston 6P caliper with a fixed design
- Two-piece slotted, drilled and zinc-plated rotor with an iron body and aluminum hat
- Billet aluminum hubs packed with premium bearings and Redline synthetic grease
- Stainless pistons and abutments paired with noise suppression clips
- Staggered piston layout to limit uneven pad wear
- Dual seals that resist dust, weather and pressure
- Billet dust caps and stainless braided hoses supplied
- Manufactured in Phoenix, Arizona, from CNC machined forged or billet aluminum parts
Matching the rotor to your driving
Brake rotors and pads work as a pair, and the pad compound affects how quickly the rotor face wears. Street driving with occasional hard stops suits a standard pad, while frequent towing or repeated hard braking calls for a pad rated for higher heat. Stick with the FMSI D0731 pad type for this kit and avoid mixing compounds between the left and right sides.
Slotted and drilled rotors shed water and gas more quickly than plain rotors, which helps during wet weather, though the openings also collect dust. After washing the wheels, dry the rotor face with a rag before the first stop. Look for hairline cracks near the drilled holes and any uneven thickness across the face.
- Keep pad backing hardware clean and lubricated at the slide points
- Replace the pads and rotor together when wear is uneven
- Use the same pad compound on both front wheels
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301367S |
| UPC | 844165040125 |
| Caliper | 6-piston (6P), fixed, silver |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Zinc plated |
| Pad type | FMSI D0731 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5 x 4.75 inch |
| Wheel stud size | M12-1.50 x 51.5mm |
| Brake hose | Steel braided, DOT approved |
| Spindles | Stock height, included |
| Axle / drive | Front / 2WD |
| Template | Q082H |
| Country of origin | US |
Vehicle fitment
Vehicles listed by the manufacturer include the 1978-1988 Buick Regal and Pontiac Grand Prix, the 1978-1987 Chevrolet El Camino, 1978-1983 Chevrolet Malibu and 1978-1988 Chevrolet Monte Carlo, the 1982-2003 Chevrolet S10 and 1983-1994 S10 Blazer, the 1982-1990 GMC S15 and 1983-1991 S15 Jimmy, and the Oldsmobile Cutlass (1978-1981 and 1985-1988) and Cutlass Supreme (1978-1988).
Four-wheel-drive trucks and model years outside the ranges above are not covered by the 2WD application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the hubs and spindles arrive assembled, installation is mainly bolting the complete front assembly to the control arms and fitting the supplied braided hoses. Compare your wheel with the Q082H template before mounting. Check pedal feel and braking at low speed before normal driving.
What’s included
The kit includes the 13-inch front rotor, the silver six-piston caliper, billet hubs with bearings, stock-height spindles, stainless braided hoses, mounting brackets and hardware.
Not included: Lug nuts.














