Overview
The M12000 is a 12000 lb self-recovery electric winch, model 17801 with UPC 12748178019. It is built for heavy-duty recovery and offers the power and torque needed to pull a large truck or SUV.
It runs on a 4.6 HP series-wound motor with a 3-stage planetary geartrain at a 261.1 gear ratio. Rope retrieves at up to 30 feet per minute with no load, and the low-profile body fits tight mounting spaces. The 125 ft of 3/8 wire rope and roller fairlead cover most recovery work.
Key features
- 12000 lb rated line pull on a 12V electric winch
- 4.6 HP series-wound motor
- 3-stage planetary geartrain for smooth, efficient operation
- No-load retrieval of up to 30 feet per minute
- Low-profile design
- 125 ft of 3/8 wire rope with roller fairlead
- Remote switch with 12 ft lead
Before you buy
A winch rated for this kind of load only works as well as the structure it bolts to. Recovery bumpers and frame-mounted plates should be checked for the winch weight and for the pull forces they will see, not just the bolt count. Think about the vehicle’s cooling and charging system too, since long pulls draw heavy current and heat the motor.
Recovery is a technique as much as equipment. Use a snatch block or tree saver to double the line where it makes sense, keep the rope spooled under tension, and avoid angles that drag the fairlead. Inspect the rope for kinks and damage after heavy use, and store the remote where it cannot be run over or pinched.
- Confirm the bumper or plate is rated for the winch weight
- Use a healthy battery and clean terminals
- Keep the remote lead clear of the rope path
Specifications
| Brand | Warn |
|---|---|
| Part number | 17801 |
| UPC | 12748178019 |
| Rated line pull | 12000 lbs |
| Voltage | 12V |
| Motor | 4.6 HP |
| Gear ratio | 261.1 |
| Remote control | Remote switch, 12 ft lead |
| Size | 24.37 in x 8.45 in x 11 in |
| Weight | 136 lbs |
| Wire rope | 125 ft of 3/8 |
| Fairlead | Roller |
| Type of winch | Electric |
Vehicle fitment
The M12000 is not tied to a specific year, make or model. Confirm the mounting position and the 24.37 in x 8.45 in x 11 in size against your bumper before installing it.
No generation or model is named, so none is excluded by name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 136 lbs, this winch needs a mount rated for its load, so plan for a bracket or bumper built to carry that weight. Use a fused, heavy-gauge power feed for the 4.6 HP motor and keep the remote lead away from the rope.
What’s included
The specifications list 125 ft of 3/8 wire rope, a roller fairlead and a remote switch with a 12 ft lead.
Not included: a mounting bracket or bumper.









