Overview
The Warn Series 6 Hydraulic Industrial winch, part number 33445, is a hydraulic winch rated for a 6,000 lbs maximum load. Warn designed it for light-duty tow wreckers and carriers. It uses a hardened steel two-stage planetary gear train with a 26:1 gear ratio, a dual-cone brake and a positive locking clutch that keeps the winch from jumping out of gear. Part 33446 is the clockwise version; part 33445 is anticlockwise.
The winch has a 3.0 cu in (49.2 cc) hydraulic motor, accepts up to 12 USGPM (45 L/MIN) of input flow, and is rated for 5/16 wire rope. It meets SAE J706 and CE Machinery Directive standards.
Key features
- 6,000 lb maximum rated load
- Hardened steel two-stage planetary gear train
- Rugged dual-cone brake
- Positive locking clutch
- Hydraulic motor of 3.0 cu in (49.2 cc)
- Meets SAE J706 and CE standards
Hydraulic supply planning
A hydraulic winch is only as good as the flow that drives it. Match the pump, hoses and fittings to the maximum input flow so the motor runs within its design range. Too little flow slows the line speed under load, while too much can overheat the system and damage seals. Check the pressure and flow rating of the power source before connecting anything.
Hydraulic lines carry stored pressure, so depressurize the system before any service work and inspect hoses for cracks, bulges and loose fittings. Keep the control valve and the winch mounting bolts tight, and use clean hydraulic fluid to protect the gear train and brake.
- Match pump and hose sizing to the maximum input flow
- Depressurize the system before service
- Inspect hoses for cracks, bulges and leaks
Specifications
| Brand | Warn |
|---|---|
| Part number | 33445 (anticlockwise); 33446 (clockwise) |
| UPC | 12748334453 |
| Maximum rated load | 6000 lbs (2727 kg) |
| Wire rope recommended | 5/16, minimum breaking strength 10500 lbs (4773 kg) |
| Maximum input flow | 12 USGPM (45 L/MIN) |
| Drum barrel diameter | 2.5 (64 mm) |
| Drum flange diameter | 6.0 (152 mm) |
| Distance between flanges | 8.92 (227 mm) |
| Hydraulic motor | 3.0 cu in (49.2 cc) |
| Gear ratio | 26:1 |
| Winch type | Hydraulic |
| Remote control | None |
| Fairlead | None |
| Standard compliance | SAE J706, CE Machinery Directive 98/37/EEC |
Vehicle fitment
The winch is built for light-duty tow wreckers and carriers. Confirm the mounting arrangement and fitment for your equipment before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a hydraulic winch, so the hydraulic supply must not exceed the 12 USGPM (45 L/MIN) maximum input flow. Depressurize the hydraulic system before working on any lines.
What’s included
The winch has no remote control and no fairlead. Recommended wire rope is 5/16, and you should check the package contents before installation to confirm whether rope is supplied.
Not included: A hydraulic power supply, which the winch needs to operate.












