Overview
The Warn ProVantage 4500S is a 4500 lb electric winch for ATVs and UTVs, model 90451 with UPC 12748904519. It is built for Side x Side owners who want extra pulling power for heavy loads.
It runs on a 1.9 HP permanent magnet motor driving a 3-stage planetary gear train at 154:1. The gear end housing is all metal, and the motor and drive train are fully sealed. The hook, tie rods and body have a corrosion-resistant black finish. Control is through a remote and a dash mounted lighted rocker switch.
Key features
- 4500 lb rated line pull with synthetic cable
- 1.9 HP permanent magnet motor
- 3-stage planetary gear train at 154:1 with roller disk brake
- All-metal gear housing and gears
- Fully sealed motor and drive train
- Aluminum hawse fairlead
- Corrosion-resistant black finish on hook, tie rods and body
Side x Side winch use
A winch on a Side x Side is most useful for self-recovery when a machine is stuck in mud, sand or a ditch. Keep the rope path clear, pull in a straight line where possible, and use a snatch block if the angle is steep. Lighter vehicles can be pulled over by a load that is too heavy for them, so keep the pull steady and stay clear of the rope.
Good habits extend the life of a compact winch. Clean mud and water from the housing, check the cable for kinks and fraying, and keep the remote cord away from moving parts. Let the motor cool between long pulls, since repeated pulling without rest adds heat to the drive train.
- Use a snatch block for steep pull angles
- Keep the remote cord away from moving parts
- Let the motor cool between long pulls
Specifications
| Brand | Warn |
|---|---|
| Part number | 90451 |
| UPC | 12748904519 |
| Rated line pull | 4500 lbs |
| Winch motor | 1.9 HP permanent magnet |
| Control | Remote and dash mounted lighted rocker switch |
| Gear train | 3-stage planetary |
| Gear reduction ratio | 154:1 |
| Braking action | Roller disk |
| Drum size | 2.25 in diameter x 4.7 in length |
| Cable | Synthetic 7/32 x 50 |
| Fairlead | Aluminum hawse |
| Winch type | ATV and UTV |
| Overall dimensions | 14.78 in L x 4.53 in W x 4.69 in H |
| Weight | 15.6 lbs |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
No year, make or model is named for this winch. It is an ATV and UTV winch, so check the mounting position and overall dimensions against your frame before fitting it.
No close model is named, so no generation is excluded by name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No mounting bolt pattern is listed, so measure the winch against the mounting bracket before drilling. Route the corded remote and the dash rocker switch wiring to keep them away from moving parts, and fuse the power feed for the motor.
What’s included
The specifications list a synthetic cable, an aluminum hawse fairlead, a corded remote and a mini-rocker control.
Not included: A mounting bracket is not included, so plan for one before fitting the winch.












