Overview
The Warn 9.0Rc rock crawling winch, part number 71550, is a 12V electric winch with a 9,000 lb pulling capacity and a low-profile design made for rock crawlers.
The winch carries 50′ of lightweight 3/8 synthetic rope on a polished aluminum hawse fairlead. The rope has a heat-resistant Nomex abrasion sleeve and a high temperature urethane coating, and a self-tightening rope attachment keeps the line on the drum. The brake is a multi-segment cam-actuated design, and the glossy red finish sits over a primer base.
Key features
- 9,000 lb pulling capacity from a 12V electric winch
- Low-profile design for rock crawling
- 50′ of 3/8 synthetic rope with a heat-resistant Nomex abrasion sleeve
- High temperature urethane coating on the rope
- Polished aluminum hawse fairlead
- Self-tightening rope attachment that keeps the line on the drum
- Multi-segment cam-actuated brake
- 360-degree swiveling hook with a glossy red finish
Rope care for rock crawling
Rock crawling puts synthetic rope through sharp edges, abrasion and sudden loads, so regular inspection matters more than with a gentler setup. The abrasion sleeve and urethane coating protect the outer fibers, but they do not protect the core from a cut that goes deep. Run the rope through your hands after each trail day and look for pinched strands or glazed spots near the fairlead.
A low-profile winch needs clear space around the body so the rope can spool without rubbing on the mount or bumper. Keep the rope off rocks while it is slack, and never wrap it around a sharp edge without protection. Store the line dry and out of direct sun when the vehicle is parked, since UV exposure weakens synthetic fibers over time.
- Inspect the rope after each trail day
- Protect the line with a sleeve or strap at sharp edges
- Store the rope dry and out of direct sun
Specifications
| Brand | Warn |
|---|---|
| Part number | 71550 |
| UPC | 12748715504 |
| Rated line pull | 9000 lbs. |
| Voltage | 12V |
| Motor | 4.8 HP |
| Gear ratio | 216.1 |
| Remote control | Remote switch, 12 ft. lead |
| Wire rope | 50 ft. of 3/8 synthetic |
| Fairlead | Hawse |
| Type of winch | Electric |
| Size | 16.95 in. x 6.3 in. x 7.52 in. |
| Weight | 54 lbs. |
| Finish | Glossy red paint over primer base |
Vehicle fitment
The winch is a universal fit unit and is not built around one make, model or year. Check the 16.95 in. x 6.3 in. x 7.52 in. body and 54 lb. weight against your mount and bumper before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rock crawling setups need clearance for a low-profile winch body, so measure the mounting space before fitting the winch. Keep synthetic rope away from sharp edges during spooling, and stand clear of the line while it carries a load.
What’s included
The winch comes with 50 ft. of 3/8 synthetic rope, a hawse fairlead, a remote switch with a 12 ft. lead, and a 360-degree swiveling hook.
Not included: A battery and any mounting plate are not part of the package, so plan to source them separately.









